ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY (/showthread.php?tid=629) Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - doon - 05-11-2021 Thanks a lot for sharing this! RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - ac427 - 05-12-2021 Does ISTA+ only work with F series cars and above? I am sure i have seen a vanos test run on an E46 using it? RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - XuLeTZ - 05-12-2021 (05-12-2021, 08:31 AM)ac427 Wrote: Does ISTA+ only work with F series cars and above?No, is working on E series as well. Only the cable has to be K+DCAN, not ENET. When using can cable, you need to configure EDIABAS with EDIABAS KONFIGURATOR from Standard tools to work with STD:OBD Also change vehicle interface from ISTA to EDIABAS RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - GrantF - 05-13-2021 Hi All, trying to get the latest version of ISTA+ for my F16. Is there a Google drive link to download the files please? Many thanks RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - XuLeTZ - 05-13-2021 (05-13-2021, 10:45 AM)GrantF Wrote: Hi All, trying to get the latest version of ISTA+ for my F16. Is there a Google drive link to download the files please?You can use the torrent, much faster and reliable than Google Drive. Unfortunately the latest version just added to the torrent, so not many seed's for high speed downloads. But you can download 4.29.1x from torrent RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - Papachivas - 05-13-2021 (08-17-2020, 10:29 PM)XuLeTZ Wrote: This Thread is for my Standalone Releases, always latest. RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - DENTFLEX - 05-15-2021 Thank you, XuLeTZ RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - pakitko - 05-16-2021 hello friends I need ista d 4.28.2x and ista p from ista d 4.28.2x RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - tthuns - 05-16-2021 @XuLeTZ After installing all went fine with the installer, but I am not able to make a connection to the car. I start with "read out ..." and then selects "Compleate ident". In the connection managerI see the VIN the ICOM connection, volt 13, but the buttons in the bottom are all greayed out. I am not able to "set up connection". the only option I have is canel Any suggestions? RE: ISTA Standalone / SQLiteDBs / SDP / BLP - latest - GrantF - 05-17-2021 (05-13-2021, 10:45 AM)GrantF Wrote: Hi All, trying to get the latest version of ISTA+ for my F16. Is there a Google drive link to download the files please? Thanks for that. Is there a link for the torrent file in here? (05-13-2021, 01:24 PM)XuLeTZ Wrote:Hi thanks again for that info.(05-13-2021, 10:45 AM)GrantF Wrote: Hi All, trying to get the latest version of ISTA+ for my F16. Is there a Google drive link to download the files please?You can use the torrent, much faster and reliable than Google Drive. Is there a link in here for the torrent file? Many thanks |