+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY (/showthread.php?tid=629)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
RE: ISTA Standalone 4.25.2x / SQLiteDBs / SDP / BLP - latest - stamish2006 - 09-26-2020
Absolutely amazing pack,mate!
Thanks!
Thanks!
RE: ISTA Standalone 4.25.2x / SQLiteDBs / SDP / BLP - latest - rudyv1 - 09-26-2020
Thank you so much!
RE: ISTA Standalone 4.25.3x / SQLiteDBs / SDP / BLP - latest - XuLeTZ - 09-26-2020
Updated to 4.25.3x
RE: ISTA Standalone 4.25.3x / SQLiteDBs / SDP / BLP - latest - martyNZ - 09-27-2020
(09-26-2020, 09:57 PM)XuLeTZ Wrote: Updated to 4.25.3x
Great work! Works out of the box!
So, how do I use ISTA-P 3.67.1 with your install for programming my E-Series? Do I have to point something to your PSDZ SDP folders in the registry?
Or, is there a guide somewhere that explains this?
RE: ISTA Standalone 4.25.3x / SQLiteDBs / SDP / BLP - latest - XuLeTZ - 09-27-2020
(09-27-2020, 01:59 AM)martyNZ Wrote:Hi,(09-26-2020, 09:57 PM)XuLeTZ Wrote: Updated to 4.25.3x
Great work! Works out of the box!
So, how do I use ISTA-P 3.67.1 with your install for programming my E-Series? Do I have to point something to your PSDZ SDP folders in the registry?
Or, is there a guide somewhere that explains this?
Usually you only need to install standard tools and that`s it, ISTA-P will be installed.
RE: ISTA Standalone 4.25.3x / SQLiteDBs / SDP / BLP - latest - martyNZ - 09-27-2020
(09-27-2020, 02:19 AM)XuLeTZ Wrote:Thanks for your quick reply.(09-27-2020, 01:59 AM)martyNZ Wrote:Hi,(09-26-2020, 09:57 PM)XuLeTZ Wrote: Updated to 4.25.3x
Great work! Works out of the box!
So, how do I use ISTA-P 3.67.1 with your install for programming my E-Series? Do I have to point something to your PSDZ SDP folders in the registry?
Or, is there a guide somewhere that explains this?
Usually you only need to install standard tools and that`s it, ISTA-P will be installed.
Hmm. I have a working INPA with Standard tools and SPDaten. I have installed your standalone and ISTAD works nicely.
But if I try to install ISTAP from this link https://www.bimmerscene.com/Thread-ISTA-P-3-67-1 then I get the Error 25000 during install.
If the above is broken, I have another ISTAP3.66 which is just an unpack and use with the loader which is working. So in this case should I change something to utilize your latest updates from the standalone installer? I have ticked with programming during installation.
Update;
If I try to start ISTA/P 3.66 it does not start anymore. I probably would have to run a reset but that might break your ISTAD. Sorry, I am confused now if this is working together or not. Using latest ISTAD from diagnosis an ISTAP for E Series coding.
RE: ISTA Standalone 4.25.3x / SQLiteDBs / SDP / BLP - latest - XuLeTZ - 09-27-2020
(09-27-2020, 02:47 AM)martyNZ Wrote:(09-27-2020, 02:19 AM)XuLeTZ Wrote:Thanks for your quick reply.(09-27-2020, 01:59 AM)martyNZ Wrote:Hi,(09-26-2020, 09:57 PM)XuLeTZ Wrote: Updated to 4.25.3x
Great work! Works out of the box!
So, how do I use ISTA-P 3.67.1 with your install for programming my E-Series? Do I have to point something to your PSDZ SDP folders in the registry?
Or, is there a guide somewhere that explains this?
Usually you only need to install standard tools and that`s it, ISTA-P will be installed.
Hmm. I have a working INPA with Standard tools and SPDaten. I have installed your standalone and ISTAD works nicely.
But if I try to install ISTAP from this link https://www.bimmerscene.com/Thread-ISTA-P-3-67-1 then I get the Error 25000 during install.
If the above is broken, I have another ISTAP3.66 which is just an unpack and use with the loader which is working. So in this case should I change something to utilize your latest updates from the standalone installer? I have ticked with programming during installation.
Update;
If I try to start ISTA/P 3.66 it does not start anymore. I probably would have to run a reset but that might break your ISTAD. Sorry, I am confused now if this is working together or not. Using latest ISTAD from diagnosis an ISTAP for E Series coding.
You better ask the uploader of ISTA-P, that`s not mine.
I would suggest to code your E series with NCSexpert and NCSdummy. Much easier IMO.
It should work togheter no problem
RE: ISTA Standalone 4.25.2x / SQLiteDBs / SDP / BLP - latest - HRette - 09-27-2020
(09-24-2020, 08:21 PM)HRette Wrote:I have tried but cannot get it to work to dl the SDP. I have installed JDownloader and added the file, that worked, added the cookie but when adding docs.goole.com it is not clear what to enter as login(09-24-2020, 10:22 AM)XuLeTZ Wrote:Thank You I will give it a try!!(09-23-2020, 07:47 PM)HRette Wrote: Thanks Great work!!
How can i download SDP? It says maximum downloads exceeded...
Thanks again!!
Thanks, super post!!
If you have download exceed quota, try using FREEDOME vpn, you have 5 days trial.
Download MEGAsync, add the link to the tool for the download to start. When you get the exceeded quota message, exit MEGAsync from taskbar by right click and EXIT.
Open FREEDOME, select any europe country and start MEGAsync again and it will download another 5gb untill the quota exceed message comes up again.. Just exit megasync, change country from freedome and start megasync again and so on until the download is completed.
. Installed Megasync also but it says it is not a Mega link and does not add it. Also installed Freedome tied diffenrent locations. How can i add the link to Megasync.Thaks for you answers!!! and patience...
RE: ISTA Standalone 4.25.3x / SQLiteDBs / SDP / BLP - latest - XuLeTZ - 09-27-2020
(09-27-2020, 08:07 PM)HRette Wrote:(09-24-2020, 08:21 PM)HRette Wrote:I have tried but cannot get it to work to dl the SDP. I have installed JDownloader and added the file, that worked, added the cookie but when adding docs.goole.com it is not clear what to enter as login(09-24-2020, 10:22 AM)XuLeTZ Wrote:Thank You I will give it a try!!(09-23-2020, 07:47 PM)HRette Wrote: Thanks Great work!!
How can i download SDP? It says maximum downloads exceeded...
Thanks again!!
Thanks, super post!!
If you have download exceed quota, try using FREEDOME vpn, you have 5 days trial.
Download MEGAsync, add the link to the tool for the download to start. When you get the exceeded quota message, exit MEGAsync from taskbar by right click and EXIT.
Open FREEDOME, select any europe country and start MEGAsync again and it will download another 5gb untill the quota exceed message comes up again.. Just exit megasync, change country from freedome and start megasync again and so on until the download is completed.
Thaks for you answers!!! and patience...
Open MegaSYNC. In the taskbar, next to date and time, right click on MegaSYNC and select Transfer Manager. Top right corner you have the Add... button > Open Links and add: https://mega.nz/#F!BHJTlI6T!Y9yBss9dZPxxLHUGdSwBkw
Remove everything but SDP if that`s the only one you need.
RE: ISTA Standalone 4.25.3x / SQLiteDBs / SDP / BLP - latest - martyNZ - 09-27-2020
(09-27-2020, 04:03 PM)XuLeTZ Wrote:(09-27-2020, 02:47 AM)martyNZ Wrote:(09-27-2020, 02:19 AM)XuLeTZ Wrote:Thanks for your quick reply.(09-27-2020, 01:59 AM)martyNZ Wrote:Hi,(09-26-2020, 09:57 PM)XuLeTZ Wrote: Updated to 4.25.3x
Great work! Works out of the box!
So, how do I use ISTA-P 3.67.1 with your install for programming my E-Series? Do I have to point something to your PSDZ SDP folders in the registry?
Or, is there a guide somewhere that explains this?
Usually you only need to install standard tools and that`s it, ISTA-P will be installed.
Hmm. I have a working INPA with Standard tools and SPDaten. I have installed your standalone and ISTAD works nicely.
But if I try to install ISTAP from this link https://www.bimmerscene.com/Thread-ISTA-P-3-67-1 then I get the Error 25000 during install.
If the above is broken, I have another ISTAP3.66 which is just an unpack and use with the loader which is working. So in this case should I change something to utilize your latest updates from the standalone installer? I have ticked with programming during installation.
Update;
If I try to start ISTA/P 3.66 it does not start anymore. I probably would have to run a reset but that might break your ISTAD. Sorry, I am confused now if this is working together or not. Using latest ISTAD from diagnosis an ISTAP for E Series coding.
You better ask the uploader of ISTA-P, that`s not mine.
I would suggest to code your E series with NCSexpert and NCSdummy. Much easier IMO.
It should work togheter no problem
Sorry, I actually meant updating software with ISTAP not coding. yes, coding is much nicer with NCSEXPERT.
I hope you can answer this one too.
Is this the registry key where ISTA-P looks for programming files? BMW.Rheingold.Programming.PsdzDataPath ..\..\..\PSdZ\data_swi
Can I put my ISTA-P folder anywhere on the drive or does it have to be in a specific folder to work with the folder depth of ..\..\.. ?
The REG key InstallLocation C:\EC-APPS\ISTA does it matter for ISTAP?
Cheers!