+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5)
+--- Forum: DIY Garage (https://www.bimmerscene.com/forumdisplay.php?fid=8)
+--- Thread: Updating retrofited NBT (/showthread.php?tid=6318)
Updating retrofited NBT - Tomasz92 - 04-07-2024
Hello guys
I have a F30 from 2013 and it comes with small screen and HU_ENTRY from factory. Somewhere in 2019 my ENTRY start to reboot every 2 minutes so i bought a NBT retrofit ready coded to my car with big screen so i have navigation too. I installed everythink by my self and everythink works perfectly.
Now after a while i decide to update my maps to 2024 but firstly i have checked that my car was updated only once in his life. Last I-Level is 15-03-503 when shipment is 13-03-503 and now the party begins
As i checked all ECU's have right VIN number even HU-NBT (it was precoded) 609 present in FA, and of course ISTA want me to replace NBT because NBT is from 2015 and car is from 2013.
When i calculate SVT i have HWEL listed red/blue
And my question is what next? When i hit "HW-IDs from SVTactual" button then HWEL is black.
Can I just proceed with flash? Because when i do TAL-Processing under HU_NBT i can only choose cdDeploy and ibaDeploy rest is greyed out.
Its actually first time i flash retrofited ECU so thanks for any help.
RE: Updating retrofited NBT - TheNine90 - 04-07-2024
I dont think you have any new firmware update. You are on latest firmware. Its only the iba(electronic interactive user manual) that whats to change since the hwel is different