PSdZdata update! - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: PSdZdata update! (/showthread.php?tid=6367) |
PSdZdata update! - Silent1990 - 04-22-2024 Hallo, I have some issues with the PSdZData...I have installed Ista+ 4.39.20 and I did download v.4.46.51_PSdZData_FULL...unzip it and copy all the data in PSdZData\data but I got an error where its saying that is not compatible with the ista+. Can someone explain me where I did wrong and how to do it step by step. RE: PSdZdata update! - taidesu - 04-23-2024 Open regedit and look for Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold look for BMW.Rheingold.ISTAGUI.App.DoInitialDatabaseConnectionCheck change to False It will work without any hitch. RE: PSdZdata update! - Silent1990 - 04-23-2024 It was not that the issue, but thank you for helping me. The steps to add programing for Ista+ is fallowing: 1.Install Ista+ (in my case ISTA_Standalone_4.39.20) standalone without programming files 2.Unpack PSdZData (in my case v4.46.41_PSdZData.7z) to C:\EC-APPS\ISTA\PSdZ\data_swi....in case you don't finde data_swi create a folder. 3.Go back to the Ista+ installation folder and go to "files_only_for_manual_install" 4.Run the fallowing files in order: - ISTA_firewall_rules.bat (run as Administrator) - ISTA_Reg_Fix_min_x64.reg - AppCheckDisable_to_use_different_DBs.reg 5.In the same folder you have regfiles_full_sdp_blp there you will finde ISTA_Reg_Fix_x64.reg...edit it and change the version of the PSdZData ex. "SWIData"="4.46.41" (optional to program with ENET cable(is not recomandet) see this: https://mhhauto.com/Thread-Programming-with-ISTA-D-and-ENET For G series (also F40(2019+) and F44(2020+)) cheat sheet see this: https://gizliozellikacma.com/en/bmw-cheat-sheet-for-all-g-series-g20-g22-g30-etc If you have laser lights or beam assistant don't mess with anti dazzle it may brick KAFAS ecu....I manage to fix it by coding again KAFAS ecu with ista+. |