BMW E90 2005 IHKA module - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2) +--- Thread: BMW E90 2005 IHKA module (/showthread.php?tid=6416) |
BMW E90 2005 IHKA module - DAVE69 - 05-03-2024 Hi, it seems like I updated my IHKA module incorrectly. I have an error with the DME "CDAC" controller, and when I checked the wires, there's no voltage. I didn't make a backup, and now I don't have access to the old software version "6958536". It installed version "9124742" instead. I've searched through my SPData and couldn't find the old version "6958536". Can anyone help me by providing the old SPData or checking which software version is newer? RE: BMW E90 2005 IHKA module - TheNine90 - 05-03-2024 You can always update using correct zusb using any sp daten version. RE: BMW E90 2005 IHKA module - DAVE69 - 05-03-2024 (05-03-2024, 06:56 PM)TheNine90 Wrote: You can always update using correct zusb using any sp daten version.The IHKA module seems to be properly coded after all. But where could such an error come from? I also tried updating the DME, but it doesn't find a newer software version error DME 00CDAC Message error (sttatus water valve, 0x03B5), DME receiver, IHKA transmitter RE: BMW E90 2005 IHKA module - TheNine90 - 05-05-2024 Check using test plan what is the recommended action. You can also try reflasing the modules RE: BMW E90 2005 IHKA module - DAVE69 - 05-05-2024 (05-05-2024, 03:53 AM)TheNine90 Wrote: Check using test plan what is the recommended action.It seems like I found the reason. I think the JBBE module is coded incorrectly. When coding it, it doesn't mark options like the additional pump. But I have it in the car. Now, how do I code everything correctly? Which options should I activate? RE: BMW E90 2005 IHKA module - TheNine90 - 05-05-2024 you can code it with ncsexpert using correct vehicle order. This will activate all options correctly. If you have some modifications you have to edit the coding data manually. |