ABL-PRF-CHECK_ECU_PROGRAMMING = FAIL! - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: ABL-PRF-CHECK_ECU_PROGRAMMING = FAIL! (/showthread.php?tid=6419) |
ABL-PRF-CHECK_ECU_PROGRAMMING = FAIL! - Harkes - 05-04-2024 Hi all This seems to be the most knowledgable forum regarding coding hence I ask here (I really hope flatter work )? I am getting the above error trying to program with ISTA+. Could it be because my ECU is flashed with MHD? Car is 2012 F20 M135i. Current I-level F020-15-07-506. Using ISTA+ 4.32.15. - Thanks, Niels RE: ABL-PRF-CHECK_ECU_PROGRAMMING = FAIL! - TheNine90 - 05-04-2024 Sometime the tuning software affect the software and cant program the normally. Try restoring the stock firmware using mhd and try again. Or use esys for flashing RE: ABL-PRF-CHECK_ECU_PROGRAMMING = FAIL! - Harkes - 05-05-2024 (05-04-2024, 12:30 PM)TheNine90 Wrote: Sometime the tuning software affect the software and cant program the normally. Try restoring the stock firmware using mhd and try again. Or use esys for flashing Hi I flashed car back to stock with MHD essentially removing it from the car. I now get this notification (which I believe is the same problem). Also, even though I select Advanced I cannot de-select programming the DME so I am stuck... RE: ABL-PRF-CHECK_ECU_PROGRAMMING = FAIL! - TheNine90 - 05-05-2024 Flash using esys so that its on latest software then ista wont update it |