+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: ISTA-D ECU not responding (/showthread.php?tid=6703)
ISTA-D ECU not responding - RoninKW - 07-28-2024
Hello
I have been restoring a 2007 X3 (E83) N52 3.0si. I've finally got ISTA reinstalled and running. When I try connecting to the car with a K+DCAN cable ISTA is only able to connect to the DME and EGS all the other ECUs show as red (not responding) or grey. Any pointers on how I can resolve this issue? or what the problem is?
RED:
DSC
LWS
VTG
EWS
GM
IHKA_0x5B
LM_0xD0
ZAE_0xA4
RAD
KOMBI_0x80
GREY:
EGS_0X32
SM_0x72
SHD
RLS_0xE8
MFL
SES
PDC
VM-GT
DSP_0x6A
TELEFON_0x??
SZM
RDC_0x70
NAV
CIDB_0xF0
RE: ISTA-D ECU not responding - RoninKW - 07-29-2024
For anyone else that runs into this the issue was I used a DCAN only cable. I got another cable that supports K-Line. With that cable all the ECUs that showed as red and most that showed as grey are accessible. The only things I can't interact with are the DME, ESG, and ESG_0X32.
Does anyone know of a way to access all the E8x series modules with a single cable. The production date on my vehicle is 03/2007