+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Issue with coding new seats to F06 (/showthread.php?tid=6885)
Issue with coding new seats to F06 - galijotase - 09-19-2024
Hi everyone,
I have a problem with coding new seats I bought for my f06 lci model. Original seats were neither comfort, nor sport. New ones are comfort from f06 year 2012.
Anyway, as I connected new seats, every single adjustment control was working, but the problem was that I was getting driver/passenger restraint system malfunction light lit up on the dash. I flashed both seat modules with esys and coded new new cafd files, however the adjustment controls stopped working, but restraint lights dissapeared. I tried manually inject 5 different cafd files that were available for each seat module without any luck. At the moment, I'm getting faults for both of the seat modules on ista :
802A2B -SMFA: coded actuator or sensor not supported by hardware version
802C0B -SMBF: coded actuator or sensor not supported by hardware version
If I code the modules back to default, I get cafd files named 255_255_255, without ability to read FDL, however adjustments work, but restraint malfunction lights come back on :/
Does anyone have a solution on this please???
Would take it to a shop myself to get it fixed, but the whole point is to learn to do everything myself. Thanksss