+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: Jbe module flashing failed (/showthread.php?tid=6963)
Jbe module flashing failed - Charger1284 - 10-07-2024
Hi,
I recently tried to Reprogram My e91 2006 320i with Ista/P.
It crashed out when Programming the JBE.
This caused a failed measures and reported: CoAPI.2000 - (CoAPI) - Ediabas or ECU description file error
After. That the car start, thanks God
But no cluster, abs ligth, wipers, no power locks, dsc ligth ok no tire presure aswell
Looking at how the modules works that is expected
Istad or istap doesn't help, it request a code VO I think and cant identifi VIN
Surfing de web it is supposed to reflash the modules using winkfp I am searching at this moment newest datens and Also playing with winkfp but I am a little bit Lost, do I need anything else? And I am not sure if winkfp is working properlly since it doesn't show any conection confirmation
RE: Jbe module flashing failed - Charger1284 - 10-08-2024
(10-07-2024, 08:31 PM)Charger1284 Wrote: Hi,
I recently tried to Reprogram My e91 2006 320i with Ista/P.
It crashed out when Programming the JBE.
This caused a failed measures and reported: CoAPI.2000 - (CoAPI) - Ediabas or ECU description file error
After. That the car start, thanks God
But no cluster, abs ligth, wipers, no power locks, dsc ligth ok no tire presure aswell
Looking at how the modules works that is expected
Istad or istap doesn't help, it request a code VO I think and cant identifi VIN
Surfing de web it is supposed to reflash the modules using winkfp I am searching at this moment newest datens and Also playing with winkfp but I am a little bit Lost, do I need anything else? And I am not sure if winkfp is working properlly since it doesn't show any conection confirmation
Well I tried with winkpf and nothing the error on istap made reference to zusb 9134485 as new a 693307 not sure I tried with the first one the process bar advanced til 100% (looks like it is working) and returned several errors, by the way I am using datens V70
for E89.
also what is need to exit the module from bootloader mode is there anything that I can try ?
by the way I am using k+dcan cable
RE: Jbe module flashing failed - Charger1284 - 10-08-2024
Another question Can You use a enet cable on an e series car?
RE: Jbe module flashing failed - wjgud123 - 10-08-2024
Nope, you cannot use ENET on E series.
First mistake which you do was using kdcan with IstaP....
spdaten v70 are enough to flash that, just use ecu update instead of choose zusb manually
RE: Jbe module flashing failed - Charger1284 - 10-08-2024
(10-08-2024, 09:05 AM)wjgud123 Wrote: Nope, you cannot use ENET on E series.
First mistake which you do was using kdcan with IstaP....
spdaten v70 are enough to flash that, just use ecu update instead of choose zusb manually
ok Perfect I will give it a try, thank you for the help
RE: Jbe module flashing failed - Charger1284 - 10-09-2024
(10-08-2024, 09:05 AM)wjgud123 Wrote: Nope, you cannot use ENET on E series.
First mistake which you do was using kdcan with IstaP....
spdaten v70 are enough to flash that, just use ecu update instead of choose zusb manually
Thank You very much it worked at the first try, just I have a check engine ligth that I dont had before but I will take a look tomorrow Is there any other step to complete before ?
Now I feel like a hacker
