+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Disable SOS (/showthread.php?tid=703)
Pages:
1
2
Disable SOS - bmw1700 - 09-09-2020
Does anyone know how code off SOS message in F series?
RE: Disable SOS - TSTE1982 - 09-10-2020
Recode Kombi, HU, ATM / TCB with added TELD to HO-Wort.
RE: Disable SOS - alhusam - 09-14-2020
(09-10-2020, 08:54 AM)TSTE1982 Wrote: Recode Kombi, HU, ATM / TCB with added TELD to HO-Wort.
I actually did this and still have the error massage " emergency system call malfunction" I know the issue is the battery in the ATM (based on ISTA) but I dont want to remove all the upper car section since my ATM is roof mounted.
Is there anyway to just disable that massage via coding? I tried to Set ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv
RE: Disable SOS - Tuerkay - 09-14-2020
(09-14-2020, 06:06 PM)alhusam Wrote:(09-10-2020, 08:54 AM)TSTE1982 Wrote: Recode Kombi, HU, ATM / TCB with added TELD to HO-Wort.
I actually did this and still have the error massage " emergency system call malfunction" I know the issue is the battery in the ATM (based on ISTA) but I dont want to remove all the upper car section since my ATM is roof mounted.
Is there anyway to just disable that massage via coding? I tried to Set ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv
Adding HO-Wort TELD or coding ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv will only work, if you have no ATM connected.
you can try to set "BUB_FITTED" in ATM 3001 ON_BOARD to "nicht_aktiv". this should disable the battery check.
RE: Disable SOS - alhusam - 09-14-2020
(09-14-2020, 08:03 PM)Tuerkay Wrote:(09-14-2020, 06:06 PM)alhusam Wrote:(09-10-2020, 08:54 AM)TSTE1982 Wrote: Recode Kombi, HU, ATM / TCB with added TELD to HO-Wort.
I actually did this and still have the error massage " emergency system call malfunction" I know the issue is the battery in the ATM (based on ISTA) but I dont want to remove all the upper car section since my ATM is roof mounted.
Is there anyway to just disable that massage via coding? I tried to Set ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv
Adding HO-Wort TELD or coding ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv will only work, if you have no ATM connected.
you can try to set "BUB_FITTED" in ATM 3001 ON_BOARD to "nicht_aktiv". this should disable the battery check.
will give it a try tomorrow morning and get back with the results. thanks!!
RE: Disable SOS - alhusam - 09-15-2020
(09-14-2020, 08:03 PM)Tuerkay Wrote:(09-14-2020, 06:06 PM)alhusam Wrote:(09-10-2020, 08:54 AM)TSTE1982 Wrote: Recode Kombi, HU, ATM / TCB with added TELD to HO-Wort.
I actually did this and still have the error massage " emergency system call malfunction" I know the issue is the battery in the ATM (based on ISTA) but I dont want to remove all the upper car section since my ATM is roof mounted.
Is there anyway to just disable that massage via coding? I tried to Set ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv
Adding HO-Wort TELD or coding ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv will only work, if you have no ATM connected.
you can try to set "BUB_FITTED" in ATM 3001 ON_BOARD to "nicht_aktiv". this should disable the battery check.
I think it worked. its been a whole day and I did small road trip and the error never showed. thanks!!
RE: Disable SOS - Tuerkay - 09-15-2020
no problem, but you should someday change that battery for safety reasons.
RE: Disable SOS - alhusam - 09-15-2020
Actually, my car is imported from US to middle east which all the telematics doesn’t work. Its funny that even cars sold here by the dealer cant connect to the online services and connected drive.
RE: Disable SOS - Tuerkay - 09-15-2020
That's because the dealers don't swap the US telematik with the ROW unit to work there. The US unit can't connect to cellular network outside US
RE: Disable SOS - up2up - 05-12-2021
Hi everyone,
Where can I find ATM 3001 ON_BOARD to set it "nicht_aktiv".
Have the same issue and Set ST_ECAL_ALIVE & ST_ECAL_TIMEOUT to nicht_aktiv
Appreciate the help