+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: VO code 5AD(LDW) (/showthread.php?tid=723)
Pages:
1
2
VO code 5AD(LDW) - martin911 - 09-18-2020
I'm about to retrofit LDW on my MO 2010 F11. I only need to add the button to have all the hardware.
I found that i should VO code KOMBI, KAFAS, HU_CIC, FRM.
Can someone confirm that, theese are all of the ECUs needing coding?
RE: VO code 5AD(LDW) - svenson - 09-18-2020
...and SZL.
You also need vibration motor on steering wheel.
RE: VO code 5AD(LDW) - martin911 - 09-19-2020
(09-18-2020, 08:47 PM)svenson Wrote: ...and SZL.That i have from factory, so szl should not be nessesary. Agree?
You also need vibration motor on steering wheel.
RE: VO code 5AD(LDW) - svenson - 09-19-2020
Shure? The only SA that have vibration is LDW.
RE: VO code 5AD(LDW) - martin911 - 09-19-2020
(09-19-2020, 06:33 AM)svenson Wrote: Shure? The only SA that have vibration is LDW.Yes. I have lane change warning (5AG) with vibration. When i wanna Overtake a car, and there is a car in the blindspot, it vibrates.
RE: VO code 5AD(LDW) - svenson - 09-19-2020
Sorry, yes 5AG has also vibration. Then is vibration active and you don't need code SZL again. Coding KOMBI, KAFAS, HU_CIC, FRM is the right way.
RE: VO code 5AD(LDW) - martin911 - 09-19-2020
(09-19-2020, 07:36 AM)svenson Wrote: Sorry, yes 5AG has also vibration. Then is vibration active and you don't need code SZL again. Coding KOMBI, KAFAS, HU_CIC, FRM is the right way.Allright, thanks.. Have you done so?
RE: VO code 5AD(LDW) - svenson - 09-19-2020
Yes, i have it functional so.
VO code 5AD(LDW) - martin911 - 09-19-2020
It worked like a charm
RE: VO code 5AD(LDW) - M5_F10_N_T - 09-20-2020
I am about to do this retrofit also, plus 5AG. I have today HBA and SLI kafas kamera.
I am most worried about the flexray connection, someone can share some input about this?
Will be fun :)