after i-level update gone highbeam anti-glare tunnel - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: after i-level update gone highbeam anti-glare tunnel (/showthread.php?tid=726) |
after i-level update gone highbeam anti-glare tunnel - GileraDNA - 09-20-2020 Hi, after i-level update gone highbeam anti-glare tunnel(g30), in esys i see set in kafas4 glare-free seted. so i don't know why doesn't work. RE: after i-level update gone highbeam anti-glare tunnel - alhusam - 09-20-2020 have you removed the 5AP from FA before performing the I-level update? if not then yop need to remove 5AP and then code BDC, KAFAS4 and HU_NBT2 RE: after i-level update gone highbeam anti-glare tunnel - GileraDNA - 09-20-2020 My car is european so 5ap doesn't exist. Attached photos. Only found in nbt highbeam assistant was not active. So puteted active. RE: after i-level update gone highbeam anti-glare tunnel - alhusam - 09-20-2020 (09-20-2020, 09:33 AM)GileraDNA Wrote: My car is european so 5ap doesn't exist. Attached photos. Only found in nbt highbeam assistant was not active. So puteted active. then just try to code BDC, HU_NBT, KAFAS4. have you touched the FLE? |