+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5)
+--- Forum: DIY Garage (https://www.bimmerscene.com/forumdisplay.php?fid=8)
+--- Thread: Need Help On Seat Module Coding (/showthread.php?tid=7346)
Need Help On Seat Module Coding - Algino8893 - 02-07-2025
Hi Everyone,
I have a coding issue with my retrofitted 456 option front driver comfort seat module ( originally seat was 459 ) after the dealer updated my software during an engine oil service
I tried the following step to VO code but no gain
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (ECU)=> Left-Click on GWS => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom) => Select OK => Right-Click on GWS (the ECU itself not the underlying CAFD) => Select CODE.
Here is the log file report after VO code failed
Caf'ssuchen>
TAL calculation started.
Locally NCD signature calculation started
Processing ncd signing finished
TAL execution started.
<>
Read SVT before TAL execution started.
Read SVT before TAL execution finished.
TAL execution started.
<ExecutionID=2025/02/06-21:41:06.763>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
<[SM2 - 6D] prepareECUforCoding started [PROGRESS]>
<[] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .] [THROWABLE]>
<[SM2 - 6D] There was an error during TAL execution, please check the log files. [WARN]>
<[SM2 - 6D] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .]>
<[SM2 - 6D] finalizeECUCoding started [PROGRESS]>
<[SM2 - 6D] finalizeECUCoding finished [PROGRESS]>
<[] finalizeVehicleCoding started [PROGRESS]>
<[] finalizeVehicleCoding finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "5s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
TAL execution finished.
the software update caused my electric second-row seat ( my car comes with third-row seat option 4UB ) switch malfunction as the driver seat just wont move forward to let the second-row seat backrest to fold down.
As final resolve, I VO code back original 459 and the second-row electric seat switch function back to normal, but ... now my driver seat cannot move at all now and I cant VO code the module as it kept showing " cdDeplo FinishedWithError , cafd ... Not Executable"
Appreciate if some expert could enlighten me here on the coding solution as I totally out of my mind now : (
Many thanksHi Everyone,
I have a coding issue with my retrofitted 456 option front driver comfort seat module ( originally seat was 459 ) after the dealer updated my software during an engine oil service
I tried the following step to VO code but no gain
Connect => Read FA (VO) => Activate FA (VO) => Read SVT (ECU)=> Left-Click on GWS => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom) => Select OK => Right-Click on GWS (the ECU itself not the underlying CAFD) => Select CODE.
Here is the log file report after VO code failed
Caf'ssuchen>
TAL calculation started.
Locally NCD signature calculation started
Processing ncd signing finished
TAL execution started.
<>
Read SVT before TAL execution started.
Read SVT before TAL execution finished.
TAL execution started.
<ExecutionID=2025/02/06-21:41:06.763>
<[] prepareTALExecution started [PROGRESS]>
<[] prepareTALExecution finished [PROGRESS]>
<[] prepareVehicleForCoding started [PROGRESS]>
<[] prepareVehicleForCoding finished [PROGRESS]>
<[SM2 - 6D] prepareECUforCoding started [PROGRESS]>
<[] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .] [THROWABLE]>
<[SM2 - 6D] There was an error during TAL execution, please check the log files. [WARN]>
<[SM2 - 6D] - [Exception - UNKNOWN] Errors during NCD generation for CAF cafd_00002259-022_002_010:
DataGroup ., Function .: More than one condition parameter is active: [., .]>
<[SM2 - 6D] finalizeECUCoding started [PROGRESS]>
<[SM2 - 6D] finalizeECUCoding finished [PROGRESS]>
<[] finalizeVehicleCoding started [PROGRESS]>
<[] finalizeVehicleCoding finished [PROGRESS]>
<[] finalizeTALExecution started [PROGRESS]>
<[] finalizeTALExecution finished [PROGRESS]>
<TAL execution finished [TAL_EXECUTION_FINISHED]>
TAL-Execution finished with status: "FinishedWithError".
TAL execution finished. Duration: "5s".
<>
Read SVT after TAL execution started.
Read SVT after TAL execution finished.
TAL execution finished.
the software update caused my electric second-row seat ( my car comes with third-row seat option 4UB ) switch malfunction as the driver seat just won't move forward to let the second-row seat backrest to fold down.
As a final resolve, I VO code back original 459 and the second-row electric seat switch function back to normal, but ... now my driver seat cannot move at all and I cant VO code the module as it kept showing " cdDeplo FinishedWithError , cafd ... Not Executable"
Appreciate if some expert could enlighten me here on the coding solution as I am totally out of my mind now : (
Many thanks
RE: Need Help On Seat Module Coding - Memedalji_ - 06-06-2025
could check for you remotely to solve the problem