+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: USA airbag to EU airbag FDL coding (/showthread.php?tid=7354)
USA airbag to EU airbag FDL coding - kartal6 - 02-09-2025
Hi,
Does anyone know if these FDL codes are correct, when switching from USA airbag steering (dual stage) to EU airbag steering (single stage)?
ECU ACSM or ACSM2:
3000 :
AIRBAG_FAHRER_STUFE_2 - nicht aktiv
ADAPTIVER_AIRBAG_FAHRER_VENT - not active
I tried on F48, but without success.
F48 2019, running esys+ 3.8 , esys 3.35 I tried to read the 3000 folder but most of the folders in the 3000 file were renamed to : “ZUENDKREIS_xx”
which makes it impossible to determine where the parameters mentioned above are located.
Thanks for advice
Thanks for advice
RE: USA airbag to EU airbag FDL coding - district - 02-10-2025
For the airbag in the steering wheel, output circuit 16 is not_active and output circuit 22 is not active
RE: USA airbag to EU airbag FDL coding - kartal6 - 02-10-2025
(02-10-2025, 08:42 AM)district Wrote: For the airbag in the steering wheel, output circuit 16 is not_active and output circuit 22 is not active
Didn’t get your answer bro
RE: USA airbag to EU airbag FDL coding - district - 02-10-2025
What do you mean?
RE: USA airbag to EU airbag FDL coding - JSC - 02-10-2025
Airbag US to ECE
ACSM Module
3000 Ausstattungsflags
Airbag_Fahrer_Stufe_2 = nicht_aktiv
Adaptativer_Airbag_Fahrer_Vent = nicht_aktiv
Airbag_Beifahrer_Stufe_2 = nicht_aktiv
Adaptativer_Airbag_Beifahrer_Vent = nicht_aktiv
after coding lock airbag with ista
RE: USA airbag to EU airbag FDL coding - district - 02-10-2025
The f48 does not say "Airbag_driver_stage_2 = not_active
Adaptive_airbag_driver_vent = not_active
Airbag_passenger_stage_2 = not_active
Adaptive_airbag_passenger_vent = not_active"
it says in places only ignition circuits! Then the circuits I specified would have to be changed in order to code the airbag from 1 to 2 stages and vice versa
RE: USA airbag to EU airbag FDL coding - kartal6 - 02-10-2025
(02-10-2025, 03:27 PM)JSC Wrote: Airbag US to ECE
ACSM Module
3000 Ausstattungsflags
Airbag_Fahrer_Stufe_2 = nicht_aktiv
Adaptativer_Airbag_Fahrer_Vent = nicht_aktiv
Airbag_Beifahrer_Stufe_2 = nicht_aktiv
Adaptativer_Airbag_Beifahrer_Vent = nicht_aktiv
after coding lock airbag with ista
Can you develop a bit on how to lock airbag with ISTA and what does that mean exactly ? In addition, as per the picture i joined, it is impossible on that car to read " Airbag_Fahrer_Stufe_2" or any other as the folder name are all set to "ZUENDKREIS_XX"
(02-10-2025, 06:11 PM)district Wrote: The f48 does not say "Airbag_driver_stage_2 = not_active
Adaptive_airbag_driver_vent = not_active
Airbag_passenger_stage_2 = not_active
Adaptive_airbag_passenger_vent = not_active"
it says in places only ignition circuits! Then the circuits I specified would have to be changed in order to code the airbag from 1 to 2 stages and vice versa
So coding with esys might not be sufficient ?
(02-10-2025, 02:44 PM)district Wrote: What do you mean?
I didn't understand what you are talking about, can you develop ? You mean the circuit at the pin connector of the airbag ? Yes, indeed stage 1 has 2 pin while stage 2 has 4 pin, but for me i eared that coding was sufficient to solve this issue
RE: USA airbag to EU airbag FDL coding - district - 02-11-2025
Simply code
output circuit 16 not active
and
output circuit 22 is not active
I have already written above
RE: USA airbag to EU airbag FDL coding - kartal6 - 02-11-2025
Ah ok. So ZUENDKREIS 16 and 22 to not active ? How did you discover that?