+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: M340i Start-Stop coding faults (/showthread.php?tid=7576)
M340i Start-Stop coding faults - Alexandru.k_24 - 05-17-2025
Hi guys,
After deactivating the start-stop system using the BimmerCode or BimmerUtility app (can't remember exactly wich app I used), the following fault message appeared on the Kombi (see attached image).
Before disabling the system, there were no faults. I deactivated the system because it was too invasive, and the start-stop deactivation button is also not present on the centre console. Is there a method or coding solution to get rid of this fault on Kombi? The car is a 2021 BMW M340i xDrive MHEV(285KW)
Thanks!
RE: M340i Start-Stop coding faults - mister - 05-18-2025
ėšÝ§ default code module that you changed parametar and that is
RE: M340i Start-Stop coding faults - Alexandru.k_24 - 05-18-2025
(05-18-2025, 08:54 AM)mister Wrote: ėšÝ§ default code module that you changed parametar and that isWouldn't this just reenable the start-stop system wich I just disabled throught coding? Indeed, the fault stored on KOMBI would dissapear, but the objective is to disable the start-stop system and have no faults.