F20 pre-LCI ICAM retrofit with NBT EVO - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: F20 pre-LCI ICAM retrofit with NBT EVO (/showthread.php?tid=759) Pages:
1
2
|
F20 pre-LCI ICAM retrofit with NBT EVO - wesleyredhat - 10-09-2021 (10-09-2021, 09:44 AM)Tuerkay Wrote: Icam2 will be automatically changed to trsvc in svt if connected and VO coded properly. Tks Sr RE: F20 pre-LCI ICAM retrofit with NBT EVO - Tuerkay - 10-09-2021 (10-09-2021, 12:07 PM)wesleyredhat Wrote:(10-09-2021, 09:44 AM)Tuerkay Wrote: Icam2 will be automatically changed to trsvc in svt if connected and VO coded properly. before wiring everything and installing all cameras, just connect the TRSVC ECU and check with esys, if you can See it. Have seen a few cases, where the TRSVC ECU wasn´t recognized although it was the right one. F20 pre-LCI ICAM retrofit with NBT EVO - wesleyredhat - 10-09-2021 (10-09-2021, 12:23 PM)Tuerkay Wrote:(10-09-2021, 12:07 PM)wesleyredhat Wrote:(10-09-2021, 09:44 AM)Tuerkay Wrote: Icam2 will be automatically changed to trsvc in svt if connected and VO coded properly. perfect, i will connect TRSVC ECU before installing the complete kit. thank you for the warning. another question, would you have the wiring diagram for TRSVC ECU? tks F20 pre-LCI ICAM retrofit with NBT EVO - wesleyredhat - 10-11-2021 it didn't work, I connected the 2 module I have and it doesn't appear in esys, I connected the wires to FEM 51, 52 for Can and nothing of the module appears. would have any tips? F20 pre-LCI ICAM retrofit with NBT EVO - wesleyredhat - 10-13-2021 The problem is that our cars come with a FEM already KCAN3 (like ICAM). When we had the option 3AG from factory, we would have got another FEM which is sending old KCAN for TRSVC |