+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5)
+--- Forum: DIY Garage (https://www.bimmerscene.com/forumdisplay.php?fid=8)
+--- Thread: Mini R56 2009 1.6 D ABS Module Coding (/showthread.php?tid=7604)
Mini R56 2009 1.6 D ABS Module Coding - wawara234 - 05-24-2025
Hi,
I bought a 2009 Mini R56 1.6D with the known ABS module issue. I’m getting error 0x5DE3 (24035) – DSC Unit Encoding Error when trying to code a used ABS module with the exact same part number as the original one.
Everything goes fine in ISTA/P – programming completes successfully, but when it comes to coding, I always get a coding error.
In ISTA+, all sensor tests and calibrations (including steering angle sensor and ABS unit tests) pass without any issues.
I also tried using NCS Expert but had no luck – same error shows up.
What could be causing this? Should I try another module and attempt coding again, or maybe you professionals already know a proven solution to this issue?
Any help would be appreciated!
RE: Mini R56 2009 1.6 D ABS Module Coding - Memedalji_ - 06-04-2025
because you hit the wrong job on ncs expert, choose sg codieren as command and then hit f3 for execute job (empty man file)
now you have as commande fgstr schreiben thats wrong
RE: Mini R56 2009 1.6 D ABS Module Coding - wawara234 - 06-08-2025
Hello
I do that after codieren.
I done evertyhing like this tiopic https://www.mini2.com/threads/r56-how-to-code-your-abs-unit-used-or-new.372368/
RE: Mini R56 2009 1.6 D ABS Module Coding - wawara234 - 06-10-2025
All done now. New Laptop New Files and ...well done. But.
Now After trying coding / programming Kombi Tacho donor one via Ista p i got REAR Spoiler Error.
Anybody can help how to turn off that sht. Please