HELP Dashcam Hardwire connection F31 - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: HELP Dashcam Hardwire connection F31 (/showthread.php?tid=783)

HELP Dashcam Hardwire connection F31 - XuLeTZ - 10-06-2020 Hi, For some time I have a VIOFO A129 Pro and I don't know how to hardwire it. Does somebody know or point me in the right direction on how to connect it and what do I need in order to make it work? The dashcam has parking surveillance which can`t be used for now because is connected to the 12v socket under the glove box. Car is F31 I have 3 wires: Black GND which I can find where to connect RED Battery+ YELLOW ACC Where do I connect them and what else do I need to buy to make it work? Thanks in advance, Alex RE: HELP Dashcam Hardwire connection F31 - Tuerkay - 10-07-2020 Hey, looking at the datasheet, i guess you´d have to connect black (GND) to ground, somewhere in the car red (power) to permanent plus (kl. 30) yellow (ACC) to kl.15 or kl.30B kl.15 if it should switch from parking mode to drive mode after pressing START-STOP or kl.30B if it should switch after unlocking car. but like i said. it´s only a guess. Maybe someone is using one of these and could correct me if i´m wrong.