+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Angle eyes stopped working after coding FRM on 2013 F01 (/showthread.php?tid=799)
Angle eyes stopped working after coding FRM on 2013 F01 - bmw1700 - 10-09-2020
The right hand side angel eyes stopped working after I coded the FRM.
I coded the following to disable front fog lights warning in the cluster:
AUSG_11_NSW_L_KALT_UEBERW_AKTIV
AUSG_11_NSW_L_WARM_UEBERW_AKTIV
AUSG_12_NSW_R_KALT_UEBERW_AKTIV
AUSG_12_NSW_R_WARM_UEBERW_AKTIV
I did some search and I found in bimmerfest forum by rentonrider that this is a known issue on F01. The solution is to code the following:
Set AE brightness to 100%. If not set to 100%, when the low beams come on, the lux go out
AE brightness: U_EFF_POL : set to wert_02
Set the cold and warm checks for DRL's to nicht_ativ
Parking Lights / DRL Cold Check Left : AUSG_04_POL_L_KALT_UEBERW_AKTIV
Parking Lights / DRL Cold Check Right : AUSG_05_POL_R_KALT_UEBERW_AKTIV
Parking Lights / DRL Warm Check Left : AUSG_04_POL_L_WARM_UEBERW_AKTIV
Parking Lights / DRL Warm Check Righ : AUSG_05_POL_R_WARM_UEBERW_AKTIV
I will try it and report if it works but what else should I do if this does not work? Anyone here had this issue before?
RE: Angle eyes stopped working after coding FRM on 2013 F01 - that4chanhackerguy - 10-22-2020
you ever figure this out?
RE: Angle eyes stopped working after coding FRM on 2013 F01 - bmw1700 - 10-23-2020
(10-22-2020, 05:45 PM)that4chanhackerguy Wrote: you ever figure this out?
No, not yet.