+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: NBT Evo - video from usb is not automatically displayed after reverse (/showthread.php?tid=854)
NBT Evo - video from usb is not automatically displayed after reverse - Alec01 - 10-28-2020
Hello all,
For those who have NBT Evo, I would like your opinion on a minor bug I'm experiencing at my end.
when I'm watching a video from usb, then I engage the reverse (my rear camera is then displayed which is ok), after that I engage D drive: The video I was watching from usb is not automatically displayed again, and instead I only get the list of videos from my usb. I have to manually go to media, select USB, so I see again the video.
I'm with 19-11 I-step, and I expect that after going from R > D, the video is automatically displayed.
This is a least what I had previously with 18-03 I-step.
What behavior do you get at your end ?
What is the expected behavior in such scenario ?
Thanks,
RE: NBT Evo - video from usb is not automatically displayed after reverse - Alec01 - 11-10-2020
Just to give a follow-up on this, I finally flashed the NBT EVO from 19-11 to 20-07, and this bug faded away.
Thanks to @dragosv6 and @DayvG for their recommendation to just update the I-level.