+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Cannot read MGU module,why? (/showthread.php?tid=857)
Cannot read MGU module,why? - noahark - 10-30-2020
I Running esys 3.30.1 with Launcher 2.8.1.155.
The problem I encountered was that MGU could not be read and modified normally, and the result was all numbers. Somebody told me that the E-sys version is too old and needs to be upgraded to 3.7?
My car is 2020 3 series, G28.
Please tell me what's going on?
Thank you very much.
RE: Cannot read MGU module,why? - noahark - 10-30-2020
(10-30-2020, 04:41 AM)dragosv6 Wrote:(10-30-2020, 02:42 AM)noahark Wrote: I Running esys 3.30.1 with Launcher 2.8.1.155.Nop. It’s too old. You need new version of token. 2.8.1 will not work cause it doesn’t have the CAFD mappings.
The problem I encountered was that MGU could not be read and modified normally, and the result was all numbers. Somebody told me that the E-sys version is too old and needs to be upgraded to 3.7?
My car is 2020 3 series, G28.
Please tell me what's going on?
Thank you very much.
Ugh..... But only this version is available in the forum. I can't find a newer version.
RE: Cannot read MGU module,why? - mattafred - 11-21-2020
hello,
I am also looking for a newer version.