Adaptive xenons (524) and HBA retrofit - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Adaptive xenons (524) and HBA retrofit (/showthread.php?tid=879) |
Adaptive xenons (524) and HBA retrofit - XuLeTZ - 11-02-2020 Hi everyone, Upgraded my basic xenon headlights to adaptive xenons. The light is bending on the road when moving the steering wheel, but high beam assist is turning entirely off when cars coming from the other side. A friend of mine has the same headlights and his headlights are avoiding the other drivers, but for me the HBA is turning off when see others, not a single movement from the headlight to try anti-glare. Do I need to code anything else beside FEM? I have KAFAS2 camera from factory. Regards, Alex RE: Adaptive xenons (524) and HBA retrofit - Tuerkay - 11-02-2020 You need to VO code FEM, ICM, KAFAS2 with SA522 Xenon Light SA524 Adaptive Headlights SA521 Rain Sensor SA520 Fog Lights SA5AC High-beam Assistant RE: Adaptive xenons (524) and HBA retrofit - XuLeTZ - 11-02-2020 (11-02-2020, 05:44 PM)Tuerkay Wrote: You need to VO code FEM, ICM, KAFAS2 withThank you mate, I will try tomorrow RE: Adaptive xenons (524) and HBA retrofit - XuLeTZ - 11-12-2020 (11-02-2020, 05:44 PM)Tuerkay Wrote: You need to VO code FEM, ICM, KAFAS2 with Me again All good but HBA is not working properly. When I have traffic the high beam shuts, didn`t create the anti-dazzle tunneling. I know US versions have 5AP and 8S4 that has to be removed from FA, mine doesn`t have them. Yesterday I found the FDL coding for 8S4 FEM > 3073 > C_AFS_ENA Disabled with 8S4 FEM > 3073 > LUT_FLC_FORWARDLIGHTING_Y F020_ohne_AFS I struggle to find the FDL for 5AP now. by any chance, do you know it? Thanks RE: Adaptive xenons (524) and HBA retrofit - Tuerkay - 11-12-2020 You can show FDL changes made by VO with NCD/CAFD tool. Right know I have no idea what else you could do except checking KAFAS FDL coding. NCD edit and check if glare free is set to active. |