+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: ÎŜ†Ä and ÏÑÞÀ using crashes with an error code. (/showthread.php?tid=8960)
ÎŜ†Ä and ÏÑÞÀ using crashes with an error code. - V3lmu - 06-11-2025
Hello!
Now I need help from industry enthusiasts.
CAR INFO:
BMW 5-series E61 -08
M57D30 (M57TU2?)
OBD CABLE INFO:
K+DCAN with switch
I did a clean install of Windows 11 on laptop. I installed Mike's Easy BMW Tools Package. The installation went smoothly.
After this, I installed ÎŜ†Ä version 4.39.20 and also installed PSzD data version 4.53.41 during the installation.
The installation went without any problems, but... there are problems using the program.
ÎŜ†Ä starts reading the car's information, but after the car's information has been read, an error message appears.
ÏÑÞÀ can read fault codes from all control units, but... when you go inside the engine control unit, an error code appears on the screen.
I have tested this with both M57 DDE 5.0 and DDE 6.0 settings. Neither allows entry.
How can these be fixed so that the programs can actually be used?
RE: ÎŜ†Ä and ÏÑÞÀ using crashes with an error code. - V3lmu - 06-11-2025
I got help on another car forum.
I got a few reg edit files from him.
- ISTA_Reg_Fix_x64_Diag_Only
- ISTA_DisableInitialDatabaseCheck
- AppCheckDisable_to_use_different_DBs
He gave the instructions to test all files 1 at a time and restart the computer.
ISTA_Reg_Fix_x64_Diag_Only - with this file, I got ÎŜ†Ä to work.
1/2 problem fixed.
Does anyone have any information on how I can get the ÏÑÞÀ program to work on the car?
RE: ÎŜ†Ä and ÏÑÞÀ using crashes with an error code. - 3xfire - 07-01-2025
I have same issue. Following...
RE: ÎŜ†Ä and ÏÑÞÀ using crashes with an error code. - Stratofortress - 07-04-2025
Your ÏÑÞÀ is missing the required files.
RE: ÎŜ†Ä and ÏÑÞÀ using crashes with an error code. - V3lmu - 08-07-2025
Can anyone post the missing files related to this ÏÑÞÀ problem in this initial thread?