+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Dme flush (/showthread.php?tid=9010)
Pages:
1
2
Dme flush - kala22 - 06-22-2025
Hi all I need help finishing a 320i 328i DME flash.
I've already flashed ZB 9322909 (MEVD17.2.4) using ė-šÝ§, but I'm missing the coding data.
Can anyone share from their PSdZData FULL the following files:
CAFD_00001CE7_000_017_012.caf
cafmapping.xml
Ideally from version 4.41.31 or 4.42.13.
I just need these for CAFD injection. Thanks in advance!
RE: Dme flush - ek1978 - 06-23-2025
More information about the car is needed here ,
Also your post is confusing , are mixing between ZB from E-Series and PSDZDATA from F-Series. What exactly is your problem ?
RE: Dme flush - kala22 - 06-23-2025
(06-22-2025, 08:31 PM)kala22 Wrote: Hi all I need help finishing a 320i 328i DME flash.
I've already flashed ZB 9322909 (MEVD17.2.4) using ė-šÝ§, but I'm missing the coding data.
Can anyone share from their PSdZData FULL the following files:
CAFD_00001CE7_000_017_012.caf
cafmapping.xml
Ideally from version 4.41.31 or 4.42.13.
I just need these for CAFD injection. Thanks in advance!
My car is a 2015 BMW F30 320i (USA) with the N20B20B engine and DME MEVD17.2.4 (HWEL: 000013E4).
I'm using ė-šÝ§ with PSdZData FULL (F-series) to flash the DME from its original 320i software to a 328i software version.
I flashed ZB 9322909, which uses SWFL_00001CE7, but I ran into an issue - no CAFD was detected because CAFD_00001CE7_000_017_012 was missing from my PSdZData car startsand drives. Trouble code in dme 1F2108 DME, Incorrect
Data Record:. Drivetrain malfunction on idrive screen
RE: Dme flush - Stratofortress - 06-23-2025
Why not edit edit SVT and use suitable typeschlussel allowing ė-šÝ§ perform all calculations and flash accordingly?
RE: Dme flush - kala22 - 06-23-2025
(06-23-2025, 08:55 AM)Stratofortress Wrote: Why not edit edit SVT and use suitable typeschlussel allowing ė-šÝ§ perform all calculations and flash accordingly?
That's what I did. I used 3a57 . Maybe I should try different typeschlussel
RE: Dme flush - Stratofortress - 06-23-2025
For F30 LCI BMW 328i USA with N20 engine the Typeschlussel is 8E73.
RE: Dme flush - kala22 - 06-23-2025
(06-23-2025, 12:12 PM)Stratofortress Wrote: For F30 LCI BMW 328i USA with N20 engine the Typeschlussel is 8E73.
2015 n20 engine not lci
(06-23-2025, 12:51 PM)kala22 Wrote:(06-23-2025, 12:12 PM)Stratofortress Wrote: For F30 LCI BMW 328i USA with N20 engine the Typeschlussel is 8E73.
2015 n20 engine not lci. Do you think I need to reset working hours
RE: Dme flush - Stratofortress - 06-23-2025
I still get another Typeschlussel 3A53 for 2015 non-LCI 328i N20.
No need to reset Working Hours, but Power Class may be different.
RE: Dme flush - kala22 - 06-23-2025
(06-23-2025, 01:37 PM)Stratofortress Wrote: I still get another Typeschlussel 3A53 for 2015 non-LCI 328i N20.
No need to reset Working Hours, but Power Class may be different.
Can I change it?
RE: Dme flush - Stratofortress - 06-23-2025
As FEM and DME were not replaced here, their discrepancy is inexistent. Reflash with another Typeschlussel first.