Why is update not an option? - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Why is update not an option? (/showthread.php?tid=911) |
Why is update not an option? - martin911 - 11-08-2020 Some time ago i updated a few modules, but I did not do a complete flash. I have downloaded the latest psdzdata, but why is there no modules to update, when my istep is 18-03? Why is update not an option? - martin911 - 11-09-2020 Anyone have a guess? RE: Why is update not an option? - masa52 - 11-09-2020 istep shipment put correct RE: Why is update not an option? - Tuerkay - 11-09-2020 Could also be that for your ECUs, 18-03 is the highest i-Level and there have not been any software changes since then. RE: Why is update not an option? - martin911 - 11-09-2020 (11-09-2020, 02:41 PM)masa52 Wrote: istep shipment put correctYes it is. Triple checked it (11-09-2020, 02:54 PM)Tuerkay Wrote: Could also be that for your ECUs, 18-03 is the highest i-Level and there have not been any software changes since then.Okay. Then all f10s should not be able to be updated higher. Sounds Strange (11-09-2020, 06:12 PM)dragosv6 Wrote: Try to put on the istep shipment 18-03-530 and do a tal calculationBut that would not be correct then, when the shipment is 10-06-512. What will happen then? But I can try for sure |