+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Tool32 issue (/showthread.php?tid=913)
Tool32 issue - olegyjy - 11-08-2020
Hi everyone.
Trying to verginize HU NBT 1d4 with tool32, but when open group file in Tool32, the job section is empty.
I anyone faced this kind of issue and how to fix it?
See attachment
RE: Tool32 issue - olegyjy - 11-08-2020
Hi mate.
Before use tool32 I checked zgw search, connection is ok, same issue with any group file suitable to f30
RE: Tool32 issue - Alec01 - 11-08-2020
If the HU has a too recent BTLD, it can't be virginized with tool32. You will need to find another tool.
RE: Tool32 issue - olegyjy - 11-09-2020
(11-08-2020, 12:24 PM)dragosv6 Wrote: Yes, your computer did not sees the zgw! Or the enet cable is not good
Go to edianas- hardware-enet and use zgw search.
See if it finds something
(11-08-2020, 04:35 PM)dragosv6 Wrote:Thank you. Fixed!(11-08-2020, 04:05 PM)olegyjy Wrote: Hi mate.
Before use tool32 I checked zgw search, connection is ok, same issue with any group file suitable to f30
Find then in ediabas/bin/ediabas.ini and see if on the connection you have = ENET
On the first line i think.
Don’t remember exactly how it’s the file structure cause i’m not on my laptop.