+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ÎŜ†Ä KL: 15 voltage is 0.0v (/showthread.php?tid=9130)
ÎŜ†Ä KL: 15 voltage is 0.0v - arthur101 - 08-06-2025
hi mates I have a problem using my ÎŜ†Ä the voltage at the top right of the ÎŜ†Ä KL: 15 turned 0.0v every time I turned off the ignition and leave the car for how many minutes. Only happens when it's been off the ignition for a few minutes but when you turn on immediately the voltage is 12.4. I don't know if there is something wrong with my installation but when I use the old ÎŜ†Ä software there is no issue on KL: 15 voltage.
RE: ÎŜ†Ä KL: 15 voltage is 0.0v - ek1978 - 08-06-2025
looks like you don't know what is KL15
KL15 is ignition switch position #2 (on) , which means once the doors are open ( depending on which car , typical post where people don't mention the most important info about car and which interface they use ) or the start/stop button being triggered , KL15 goes to 0V