+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: Problem connecting to E46 and E60 with genuine ÏçØɱ (/showthread.php?tid=9508)
Problem connecting to E46 and E60 with genuine ÏçØɱ - BlackSeaMan - 02-26-2026
Hello everyone,
Thanks to you and your very usefull posts i managed to install the BMW software kit ( ÎŜ†Ä 4.56.30 with PSDZdata 4.57.30 and all the StandardTools with EDIABAS 7.6.0 ) . I haven't received any errors when installing the kits and the antivirus hasn't reported anything to catch my attention.
The problem is that when i try to connect to my E46 320d and to a friend's E60 525d the software can identify the vehicle with VIN number and everything but when it comes to doing a scan it won't identify any of the ECU's, they show up on the tree list but i can't comunicate with them. I'm trying to use a genuine ÏçØɱ Next interface on it, and it detects both permanent 12V and ignition 12V lines . I attached all the info that i think they might give you an idea about the origins of my problem.
Any suggestions are welcomed.
Thank you!
RE: Problem connecting to E46 and E60 with genuine ÏçØɱ - Stratofortress - 02-26-2026
Update ÏçØɱ firmware to latest.
RE: Problem connecting to E46 and E60 with genuine ÏçØɱ - BlackSeaMan - 02-27-2026
(02-26-2026, 10:39 PM)Stratofortress Wrote: Update ÏçØɱ firmware to latest.
Thank you for your answer. Any suggetions for where to get the firmware files for the genuine interface?
RE: Problem connecting to E46 and E60 with genuine ÏçØɱ - Stratofortress - 02-27-2026
Look around. https://www.bimmerscene.com/showthread.php?tid=9492
RE: Problem connecting to E46 and E60 with genuine ÏçØɱ - BlackSeaMan - 02-28-2026
(02-26-2026, 10:39 PM)Stratofortress Wrote: Update ÏçØɱ firmware to latest.
Thank you again for your help!!!! I had to update it one version by one until i booted up ÎŜ†Ä and it showed the latest firmware update for the version i installed. After the the update was done everything is working like a charm!!! I was a little bit frustrated because i've been told that the interface is damaged if it doesn't communicate with K-line ECUs so it was a releaf for me.
