+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: Coding HOD out after steering-wheel replacement (/showthread.php?tid=9681)
Coding HOD out after steering-wheel replacement - Yoully - 09-24-2026
I’m looking at replacing the steering wheel in my 2023 G22 M440i but the replacement does not support the factory capacitive Hands-On Detection.
* I-Step S18A-25-07-538
* 5AU Driving Assistant Professional
* 248 heated steering wheel
* Automatic Lane Change enabled
Is it possible to code the car for a non-HOD steering wheel while keeping the Steering and Lane Control Assistant and Automatic Lane Change functions?
Would changing HOD_VERBAUT to “not fitted” make SAS3 fall back to steering-torque detection, or would it disable or restrict the 5AU functions?
Has anyone tested this on an S18A vehicle with SAS3 or any other car.
Thanks.