04-08-2021, 08:50 AM
We have recieved 86% of our goal .. | ||||||
|
||||||
Bench Setup not working with NBT Evo
|
No need reflash zgw to change vin, and you don’t need to write your car VO to zgw too.
Send me your team viewer.
04-12-2021, 04:39 AM
(04-07-2021, 11:15 PM)Tuerkay Wrote: Since no one could help me and i didn´t want to rob rasool376 his sleep at night, i checked my bench setup again and could fix my issues.it's fine. put it on the car and all the text will appear!
04-12-2021, 07:49 AM
(04-12-2021, 04:39 AM)markus Wrote: it's fine. not that easy. It´s not just missing text like it normaly happens on bench flash. It´s a black screen (not CP or wrong CID coding), no input response and an error, that i thought should not appear on this unit. Right now it looks like the seller gave me a modified unit, where the sticker with OEM number says one thing but the Hardware inside another. Seller possible mixed hardware from different HUs...
04-15-2021, 09:18 PM
04-21-2021, 01:34 AM
Hello,
borrowing this thread as I'm trying to connect an EntryNav2 to my pc on bench. I tried with wiring to the ethernet pins in the quadlock and then assigning an IP with DHCP on the PC. Arduino is keeping it awake. Screen showing no signal (wrong CID coding). I can ping the HU and connect with Tool32, but Esys (connection via gateway URL) just won't list it when I press read ECU. Any ideas? I could try with a ZGW 02 8SK I can borrow. Anything I should prepare on the ZGW before connecting it to the HU? Will a mismatching VIN in ZGW trigger component protection on the HU? Flash it to change VIN or is there any other way (Tool32)? Thank you
04-06-2022, 11:17 AM
(04-07-2021, 11:15 PM)Tuerkay Wrote: Since no one could help me and i didn´t want to rob rasool376 his sleep at night, i checked my bench setup again and could fix my issues.Hello, What was the issue?
04-07-2022, 03:47 PM
04-11-2022, 12:24 PM
(04-07-2022, 03:47 PM)Tuerkay Wrote:Thank you for reply. I have same problem right now can't get it turn on the screen on bench.(04-06-2022, 11:17 AM)alsamaraie Wrote: Hello, I can see when I connect the CAN bus from the arduino it gos wake. While just the HU and the screen connected the consuming 1.7-2.2 amps.
04-16-2022, 08:31 PM
(04-07-2022, 03:47 PM)Tuerkay Wrote:Do you use same code you wrote in the post?(04-06-2022, 11:17 AM)alsamaraie Wrote: Hello, |
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)