We have recieved 83% of our goal ..


Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HU SERVICE MANAGER .zip attached
#1
Allows you to write your own Service to HU NBT OR CIC

Please note if BMW do update your service history this will wipe any services you have inputted

*ALL DISTANCES ARE IN KM SO PLEASE CONVERT BEFORE GOING AHEAD TO WRITE TO CAR*

NBT service should show immediately - CIC will need restart.

ENJOY!

Checked with BitDefender Total Security


Attached Files
.zip   BMW-HU-ServiceManager.zip (Size: 978.78 KB / Downloads: 5,134)
[-] The following 26 users say Thank You to x5m254 for this post:
  • Andreis, arthur101, blosse, costyn33l, Creation5947, Daniel86, dms83, Harko, intranet, Jorbabcnman, Knakkel, Marionik72, mavi1977, Monty11, Nik33779, pgonline, piter, pmoral, razor1199, sakis4paok, sgodber, sidj, splashsergio, supE60, tamer03, Tobsnx335d
Reply
#2
just download and use? nothing else? i know some have said u need ediabas working for this to work..
Reply
#3
(04-12-2020, 07:51 PM)khajjan Wrote: just download and use? nothing else? i know some have said u need ediabas working for this to work..


Yes that is correct
Reply
#4
(04-13-2020, 02:21 AM)x5m254 Wrote:
(04-12-2020, 07:51 PM)khajjan Wrote: just download and use? nothing else? i know some have said u need ediabas working for this to work..


Yes that is correct
Cant tell what us said was correct ? so i need ediabas?
Reply
#5
(04-13-2020, 03:47 PM)khajjan Wrote:
(04-13-2020, 02:21 AM)x5m254 Wrote:
(04-12-2020, 07:51 PM)khajjan Wrote: just download and use? nothing else? i know some have said u need ediabas working for this to work..


Yes that is correct
Cant tell what us said was correct ? so i need ediabas?


Yes you will need correctly installed edibas with the right .prg file - if you need help send me a PM
[-] The following 2 users say Thank You to x5m254 for this post:
  • Bmwswiss, Jorpibe
Reply
#6
I need your help as well if possible.
PM sent.

Cheers
Don't forget to press =====>[Image: Thanks.jpg] if you think I helped
[-] The following 1 user says Thank You to XuLeTZ for this post:
  • alexian
Reply
#7
Could also do with some help as I have tried many times to get this to work, but it always gives an error when trying to connect.
Reply
#8
(04-13-2020, 11:01 PM)XuLeTZ Wrote: I need your help as well if possible.
PM sent.

Cheers
Hi XuLeTZ,

Did u copy the ECU files ?
Reply
#9
(04-24-2020, 11:09 AM)Elite6k Wrote:
(04-13-2020, 11:01 PM)XuLeTZ Wrote: I need your help as well if possible.
PM sent.

Cheers
Hi XuLeTZ,

Did u copy the ECU files ?
[b][b]x5m254 did it for me remotely.

[/b]
[/b]Thanks
Don't forget to press =====>[Image: Thanks.jpg] if you think I helped
[-] The following 1 user says Thank You to XuLeTZ for this post:
  • Mistevan
Reply
#10
I got this working in the end.

The ecu files were too old, my car has 2019 software on it, so needed newer files.
Reply




Users browsing this thread: 1 Guest(s)