We have recieved 83% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bmw F11 surroundview retrofit
#1
I finished the project yesterday.

Total requirements is 8 HSD cables, 2 sideview cameras, 2 topview cameras, 2 brackets for sideview, trsvc module, 2 mirror housings, and the button in the centercole.

Then add 5DL and vo code. I spent about 1000 $ in total I guess. All bought from ebay. Cables were new and alle other were used.                                                    

Sendt fra min SM-G991B med Tapatalk
[-] The following 3 users say Thank You to martin911 for this post:
  • dzooky, Tamme, volo
Reply
#2
Thank you for sharing !
Reply
#3
Well done mate! Nice to see others retrofitting on an F11, whats next TJA assist?......(Thats what im trying to code now)
Reply
#4
(10-02-2021, 05:12 PM)Jameabebby Wrote: Well done mate! Nice to see others retrofitting on an F11, whats next TJA assist?......(Thats what im trying to code now)
Is it possible on a pre lci ?

Sendt fra min SM-G991B med Tapatalk
Reply
#5
What u used for drilling holes in front bumper? thank u
Reply
#6
(01-02-2022, 11:53 AM)CarZone Wrote: What u used for drilling holes in front bumper? thank u
I used an oem VAG (SKoda) pdc hole cutter from Ebay
[-] The following 1 user says Thank You to martin911 for this post:
  • Paulf26
Reply
#7
(04-11-2021, 06:22 PM)martin911 Wrote: I finished the project yesterday.

Total requirements is 8 HSD cables, 2 sideview cameras, 2 topview cameras, 2 brackets for sideview, trsvc module, 2 mirror housings, and the button in the centercole.

Then add 5DL and vo code. I spent about 1000 $ in total I guess. All bought from ebay. Cables were new and alle other were used.

Sendt fra min SM-G991B med Tapatalk

Hi,
can you share the parts liste?
i would love to do that retrofiting on my F10 Blush
Reply
#8
(01-27-2022, 04:59 PM)martin911 Wrote:
(01-02-2022, 11:53 AM)CarZone Wrote: What u used for drilling holes in front bumper? thank u
I used an oem VAG (SKoda) pdc hole cutter from Ebay
 

hi can you tell me where u passed to engine compartment with hsd cable for side view??
Reply
#9
(11-21-2022, 01:35 PM)Drimacus Wrote:
(01-27-2022, 04:59 PM)martin911 Wrote:
(01-02-2022, 11:53 AM)CarZone Wrote: What u used for drilling holes in front bumper? thank u
I used an oem VAG (SKoda) pdc hole cutter from Ebay
 

hi can you tell me where u passed to engine compartment with hsd cable for side view??
Ista shows where Smile can't remember exactly, but one in each side. One at the blower motor st the fusebox

Sendt fra min SM-G991B med Tapatalk
Reply




Users browsing this thread: 1 Guest(s)