VLD CODING

[jlin1001]

Wanting to code VLD on my '18 X3 and '16 750 (both have adaptive LED's).

Using Bimmercode, in BDC2, I found the two items that need to be enabled:

3530 LaMaster1 > C AFS ENA
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y

However, if I use E-sys/CAS 1DF8 module,

3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y is nowhere to be found in either car.

At any rate, enabling both via BC didn't seem to make any changes, i.e., the left beam didn't pan in response to D or R.
Any idea? 

[JD_RFTR]

U cant code it with BC. U need esys and do vo coding not fdl. U can actually do and fdl coding but there will be just too much to do, in bdc + fle, amd tms + frm, for both cars

[Petro94]

Wanting to code VLD on my '18 X3 and '16 750 (both have adaptive LED's).

Using Bimmercode, in BDC2, I found the two items that need to be enabled:

3530 LaMaster1 > C AFS ENA
3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y

However, if I use E-sys/CAS 1DF8 module,

3530 LaMaster1 > LUT FLC FORWARDLIGHTING Y is nowhere to be found in either car.

At any rate, enabling both via BC didn't seem to make any changes, i.e., the left beam didn't pan in response to D or R.
Any idea? 

I have the same problem with my '17 740, cannot find LUT FLC FORWARDLIGHTING Y. I did VO coding with esys, removed 5AP and 8S4. My car has 524 Adaptive Headlights, not 552.

[TheNine90]

I have check on caf 00001DF8 LUT_FLC_FORWARDLIGHTING_Y is available. Which version is your cafd?