We have recieved 83% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to Register/Code Battery E/F Series
#1
E SERIES:

rocedure to register new battery using INPA:

Step 1: select BODY from the left hand pop-up menu
Step 2: select POWER MODULE in the right hand list
Step 3: select ACTIVATE from the next menu
Step 4: Select ACTIVATE2 from the next menu
Step 5: Then select F7 - Register battery replacement. Almost instantly you get the message: "Register battery replacement Activated properly."


F SERIES:

In that case you open up Toolset 32 (under EDIABAS folder):
1. Open MSD80.prg

2. Look up steuern_batterietausch_registri. (near bottom of job list)

3. Go to Jobs menu

4. Select Run Job



(May alternatively be under MSV70 or MSV80.prg)



Also, and this is important: 
THIS IS ONLY FOR REGISTERING AN OEM BATTERY FROM BMW! Alternate replacements will need additional coding to match voltage etc differences
Looking for FSC's? (Apple Carplay , Navigation Updates , Region Change etc)? 

2024 Special for BimmerScene Members / Reseller Rates now available!

Send me a Private Message for more info

[Image: image.png]

BimmerUtility - Latest CAFD Mapping - FREE Lifetime Mapping Updates - ISTA Equivalent Read / Clear Errors - Cheat Code Editor - NCD Compare - Fully Mapped FA EDITOR - and more!

https://www.BimmerUtility.com

[Image: logo.png]
Make sure to Join the Bimmer Scene Official Facebook Group  Checkeredflag 
[-] The following 9 users say Thank You to Rob for this post:
  • alincls, bumerz, JD_RFTR, kachung, mamajack123, maverx, Noworries, Vasilis, WinstonWolfe
Reply
#2
Thank you for the post but What extra coding wil it take?
Reply
#3
(12-07-2020, 07:11 PM)LLB19 Wrote: Thank you for the post but What extra coding wil it take?

This write up is for registering the replacement. It applies if the new battery is the same type and with same parameters as the previous one. 

If you change the battery type (AGM<->lead-acid) and/or capacity you will also have to change the battery specs in VO and code modules that need it. Different models need different approach.
Reply
#4
thank you very much
Reply
#5
changed the battery now I fix Upgrade thanks
Reply
#6
I always thought the E series did not require to register the battery.

Interesting

Regards,
Mark
Reply




Users browsing this thread: 1 Guest(s)