We have recieved 83% of our goal ..


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Update ID5
#1
Hello,

What is the installation procedure to update the gps via usb of an id5?
Reply
#2
For updates you will need a 16Gb, 32Gb or 64Gb USB PEN
make sure you format them to FAT32 beforehand

- for Motion or Premium upgrade you will need a USB stick with 16Gb or 32Gb capacity and formatted in FAT32
after unzipping the download file, open it on the computer and copy only the folder (pkdgb ) and file (config.nfm ) to the root of the pen...don't copy anything else
then just turn on the ignition, insert the pen into the usb port of the glove box and if everything is ok the update menu will appear and enter code...

- for NEXT update you will need a 32Gb or 64Gb USB stick formatted in FAT32,
after downloading, unzip and copy only the content ( 8 items ) that is in a folder named "root" to the root of your pen,
then just turn on the ignition and insert the pen into the usb port and follow the steps that appear on the monitor...

- for the EVO update you will need a 64Gb USB stick formatted in FAT32 or NTFS,
after downloading, unzip and copy only the content that is in a folder named "NAVD_000024A8_xxx_xxx_xxx" to the root of your pen,
then just turn on the ignition and insert the pen into the usb port and follow the steps that appear on the monitor...

- for MOVE update you will need a 16Gb pen in FAT32, after downloading and unzipping copy the content (41 items) that is in a folder named "USB" to the root of your pen,
then just turn on the ignition and insert the pen into the usb port and follow the steps that appear on the monitor...

- for ROUTE update you will need a 32Gb pen in FAT32, after downloading and unzipping copy the content (4 items) from the "root" folder to the root of your pen,
then just turn on the ignition and insert the pen into the usb port and follow the steps that appear on the monitor...

- for WAY update you will need a 32Gb pen in FAT32, after downloading, unzip and copy the contents of the folder "NAVD_00003C2C_255_007_083" (7 items) to the root of the usb pen,
then turn on the ignition, insert it into the car's usb port and follow the instructions that appear on the monitor...
[-] The following 1 user says Thank You to jams01 for this post:
  • Anita63
Reply




Users browsing this thread: 1 Guest(s)