We have recieved 83% of our goal ..


Thread Rating:
  • 9 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Easy BMW Tools for E Series (NCS EXPERT,INPA,EDIABAS,WINKFP,TOOL 32,NCS DUMMY)
Благодаря за споделянето Big Grin
[-] The following 1 user says Thank You to neykov for this post:
  • karton2012
Reply
(03-28-2020, 10:37 PM)Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com
Thank You
[-] The following 1 user says Thank You to gercso.tibor for this post:
  • karton2012
Reply
Thank you very much
Reply
(02-17-2022, 11:32 AM)Math Wrote:
(03-28-2020, 10:37 PM)Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com

thank you very much

thank you very much
Reply
(03-28-2020, 10:37 PM)Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com
its nice tanks very much Portugal
Muito Obrigado!!!!  Smile Smile Wink
Reply
AWESOME THANKS!
Reply
(04-19-2020, 02:17 AM)imrankabirayon Wrote:
(03-28-2020, 10:37 PM)Rob Wrote: [Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable

Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com



great post
[-] The following 1 user says Thank You to mikeycoins23$ for this post:
  • Schlumpf21
Reply
(02-17-2022, 11:32 AM)Mathematik Wrote:
(03-28-2020, 10:37 PM)rauben Wrote:
[Image: untitled.png]
Was ist installiert?
- Inpa 5.0.6 (mit englischen Skriptdateien und Unterstützung für die F-Serie)
-EDIABAS 7.3.0
- NCS Expert (mit englischen Menüs und Schaltflächen und vorinstalliertem NCS-Dummy-Profil)
- NCS-Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integriertes SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (zur Verwendung als Alternative zum NCS-Dummy oder zum Aktualisieren von DATEN-Dateien, sobald neue verfügbar sind)
- USB-Treiber für Kabel
Warum ist das vorteilhaft?
- Eine einzige Installation installiert ALLE Programme, die für Codierung und Diagnose benötigt werden, aktualisiert die Programme, um englische Menüs anzuzeigen, richtet NCSExpert mit dem richtigen NCSDummy-Profil ein, installiert automatisch USB-Treiber und wird mit SP-DATEN 53.3 integriert (JA , integriert!)
- Alle neuesten Versionen der Programme in einer übersichtlichen Installationsdatei
- Kein Jagen oder Suchen nach SP-DATEN und anschließendes mühsames Importieren
- KLEINE Dateigröße. Das gesamte Paket ist nur 170 MB groß!! Es müssen keine 15 GB DATEN-Dateien heruntergeladen werden.
- PATH-Variablen der Systemumgebung, die vom Installer verwaltet werden
- USB-Treiber enthalten und automatisch installiert (und herausgefunden, ob Sie den 32-Bit- oder 64-Bit-Treiber selbst benötigen)
Das EINZIGE, was Benutzer möglicherweise tun müssen, ist, ihren COM-Anschluss nach der Installation auf COM1 umzukonfigurieren, aber nach der Installation wird eine Readme-Datei mit einfachen Anweisungen angezeigt.
Besondere Anerkennung: Stylinmike aus Edmonton für die Erstellung eines unverzichtbaren Tools für alle Programmierer, die versuchen, die E-Serien-Codierung durchzuführen, ohne eine riesige DATEN-Datei zu benötigen, dies ist so gut wie es nur geht, wenn die Einrichtung der E-Serien-Codierung leicht gemacht wurde.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Das Passwort ist bimmerscene.com Heart
Reply
thanks to you man
Reply
(03-28-2020, 10:37 PM)Rob Wrote:
[Image: untitled.png]
What's Installed?
- Inpa 5.0.6 (with English script files & Support for F-series)
- EDIABAS 7.3.0
- NCS Expert (with English menus and buttons, and NCS Dummy Profile pre-installed)
- NCS Dummy 4.0.1
- Tool32 4.0.3
- WinKFP 5.3.1
- Integrated SP-DATEN v53.3
- BMW Coding Tool v2.5.0 (for use as an alternative to NCS Dummy, or to update DATEN files as new ones become available)
- USB Drivers for cable
Why is this Beneficial?
- One single installation will install ALL the programs needed for coding & diagnosis, will update the programs to show English menus, will set up NCSExpert with the correct NCSDummy profile, will automatically install USB Drivers, and comes integrated with SP-DATEN 53.3 (YES, Integrated!)
- All the latest versions of the programs in one neat install file
- No hunting or searching for SP-DATENs then struggling to import them
- SMALL file size. The entire package is only 170MB!! No need to download 15GB of DATEN files.
- System Environment PATH variables taken care of by the installer
- USB Driver included and automatically installed (and figured out if you need the 32 bit or 64 bit driver by itself)
The ONLY thing that users may need to do is reconfigure their COM port to be COM1 after the install, but a Readme file pops up after the install with simple instructions.
Special Credit: to stylinmike out of Edmonton for creating an essential tool for all coders trying to accomplish E Series coding without needing massive DATEN file, this is as good as it gets for E Series Coding Setup made easy.
You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
[/font][/size][/color]
Password is bimmerscene.com
Reply




Users browsing this thread: 10 Guest(s)