We have recieved 83% of our goal ..


Thread Rating:
  • 3 Vote(s) - 3.67 Average
  • 1
  • 2
  • 3
  • 4
  • 5
4.39.20 ISTA "Programming Data: n/a"
#1
hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
[-] The following 1 user says Thank You to devildevil87 for this post:
  • NullByteZero
Reply
#2
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Dyno Tested Stage 1 / 2 ECU Remap
TCU Remap
Checksum Correction
Custom Power Supply
PopCorn / Hard Cut Limiter
ECU Cloning
PopsBangs
Launch Control Activation
E85 Conversion
DPF / EGR / Adblue / NOX / Lambda Off and many more.
[-] The following 18 users say Thank You to adelin731 for this post:
  • 1989964, Adrian66, Aeko, akataka, AlRoss, APower, benzbmb, devildevil87, dwori, Edi-EZTuning, hopasuss, ihm311, kamil1555, lordchadski76, Marczello, Nighteagle_67, rew, V3lmu
Reply
#3
Thanks ~
I can do programming now~
if I want to link e-sys to the same database?
What Should I do?
Or I need create separate Psdz file to link E-sys?
Reply
#4
(05-27-2023, 01:36 AM)devildevil87 Wrote: Thanks ~
I can do programming now~
if I want to link e-sys to the same database?
What Should I do?
Or I need create separate Psdz file to link E-sys?
Just create a symlink and share same psdzdata folder between ista and esys
Dyno Tested Stage 1 / 2 ECU Remap
TCU Remap
Checksum Correction
Custom Power Supply
PopCorn / Hard Cut Limiter
ECU Cloning
PopsBangs
Launch Control Activation
E85 Conversion
DPF / EGR / Adblue / NOX / Lambda Off and many more.
[-] The following 2 users say Thank You to adelin731 for this post:
  • devildevil87, kamil1555
Reply
#5
Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped??? thanx

(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped and then copied to the data_swi ??? thanx
Reply
#6
(07-10-2023, 05:23 PM)Meguinness Wrote: Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped??? thanx

(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped and then copied to the data_swi ??? thanx
yes it needs to be unzipped, so you paste the psdzdata folder into data_swi folder
Dyno Tested Stage 1 / 2 ECU Remap
TCU Remap
Checksum Correction
Custom Power Supply
PopCorn / Hard Cut Limiter
ECU Cloning
PopsBangs
Launch Control Activation
E85 Conversion
DPF / EGR / Adblue / NOX / Lambda Off and many more.
[-] The following 1 user says Thank You to adelin731 for this post:
  • Meguinness
Reply
#7
(05-27-2023, 01:36 AM)devildevil87 Wrote: Thanks ~
I can do programming now~
Sure? This is the version that doesnt need a licence?
I read somewhere that it does not have programming license.
Do you get the constant error about The programming system could not be initialised?
Reply
#8
(07-10-2023, 06:52 PM)adelin731 Wrote:
(07-10-2023, 05:23 PM)Meguinness Wrote: Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped??? thanx

(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Then paste the full psdzdata???? does the v4.39.20_PSdZData.7z need to be unzipped and then copied to the data_swi ??? thanx
yes it needs to be unzipped, so you paste the psdzdata folder into data_swi folder

Hi, please tell me, I use ISTA 4.36.40, downloaded the latest PSdZData_Lite_4.43.31 , how do I update the data? I just need to replace all the files, whether I need to edit something in the registry or some other actions. I hope for your help, thank you.
Reply
#9
(05-22-2023, 07:20 AM)adelin731 Wrote:
(05-22-2023, 02:09 AM)devildevil87 Wrote: hi,
Everyone~
after install ista4.39.20, I notice that the programming data is N/A.
Anyone had written guide of how to link the Psdz data to Ista 4.39.20~
So, the programing data could be appeared.
The Psdz data I had now is 4.41.20 one~
First go to C:\EC-APPS\ISTA\PSdZ , create a folder and name it data_swi
Then paste the full psdzdata folder into that folder
Open the folder where you extracted the ISTA archive, go to \files_only_for_manual_install\regfiles_full_sdp_blp\ and edit ISTA_Reg_Fix_x64.reg with notepad
Find "SWIData"="4.39.20" and replace 4.39.20 with the version of your full psdzdata
Save the changes and run ISTA_Reg_Fix_x64.reg
Now you can open ISTA, the programming data should appear.
Excellent info - just what I needed!
Reply
#10
Does anyone know where the error is here? I wanted to reset the service but it tells me there is no content and it shows everything in numbers

Have standalone 4.39.20 on it with psdzdata full 4.45.30. could psdzdata be faulty?

[Image: 429673687-3699976156996379-8842815449609636259-n.jpg]
Reply




Users browsing this thread: 2 Guest(s)