F97 X3M 2WD

[real.jug]

Hey,

does somebody know how to get the 2WD Option in the F97 X3M? Some say, you have to flash the M5 Software but does someone have some instructions?

Thanks,
Julius

[TheNine90]

You might need to change the typecode and use it for flashing

[Nighteagle_67]

hey guys any solution? and no i dont want to buy a remote session. i am here to learn. from that what i know you have to flash dsc.

[Edi-EZTuning]

flashing HU and DSC using M5 F90 Typecode

[ptsimps]

I've tried messing around with this.  I started with my stock FA, changed the typecode from TS03 to JF03, I had to remove a few SA items as they were not compatible with the M5 typecode, and was able to calculate an FP, then calculated and SVT.  Going purely off the colors in the SVT Tree, it looks like only the SWFK file has changed in DSC3, and nothing has changed in HU_NBT2.  

I'm a novice, so I'm a bit hesitant to just send it and code the DSC3 and HU_NBT2.  

Anyone have any advice?  I'd like to learn, not interested in a remote session.  Thanks!

[Sebi04.04]

Has anybody figured out on how to do this ? I would like to try on my X3M as well.

Thanks!

[Joebie]

I've tried messing around with this.  I started with my stock FA, changed the typecode from TS03 to JF03, I had to remove a few SA items as they were not compatible with the M5 typecode, and was able to calculate an FP, then calculated and SVT.  Going purely off the colors in the SVT Tree, it looks like only the SWFK file has changed in DSC3, and nothing has changed in HU_NBT2.  

I'm a novice, so I'm a bit hesitant to just send it and code the DSC3 and HU_NBT2.  

Anyone have any advice?  I'd like to learn, not interested in a remote session.  Thanks!

I managed to get through to being able to start the SVT calc, but under KIS Verification I'm not seeing the correct iStep info.  Although, to be honest, I'm not sure I would code any of it even if I did get that completed LOL.

[Ivanson]

Can be done via coding only

[RetrofitUK]

HU_MGU
M_ALLRAD -> aktiv
M_MODUS -> 3_werte (00)

DKOMBI4
HMI_M_AWD_ENABLE -> anzeige_permanent

Now need to find parameters for DSC