We have recieved 83% of our goal ..


Thread Rating:
  • 39 Vote(s) - 4.69 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY
(09-03-2020, 05:17 PM)Rob Wrote: Google Drive LINK ADDED

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.

Hello Rob,

Im getting the files from your GoogleDrive link.

But on two files from the FSC map i got the message contains virussen cant download.
Good you check this out?

Thanks for the effort!

LejonF11
[-] The following 1 user says Thank You to LejonF11 for this post:
  • bbgang
Reply
thank for you work
Reply
Well, I would like to say thank you very much for this. I will be using ISTA D with a USB cable on a 2007 E93 325d, to say a proper thank you I will report back here any problems with setup and any solutions tried. Hope this will be of help to someone here.
Reply
Hello and thank you. Wink
Reply
Thumbs Up 
thanks for everything! Big Grin
Reply
thanks, i try to install, hope it works
Reply
Thumbs Up 
(09-04-2020, 10:32 AM)wlodar.wsz Wrote:
(08-17-2020, 10:29 PM)XuLeTZ Wrote: Thanks to Sedoy from CT 

Quote:This Thread is for my Standalone Releases, always latest.

If you have no idea how to install ISTA manually, use my installer!!!

Please don't ask me for another Languages!!!

ISTA Standalone

* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Unknown terminal voltage!" message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.25.1x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.25.13.exe
|  ISTA_v4.25.13.21836.7z (required)
|  BLP_4.25.12.7z (required)
|  SDP_4.25.12.7z (if needed)
|
\---SQLiteDBs
        EN_4.25.12.7z (required)
        DE_4.25.12.7z (if needed)
        ZH_4.25.12.7z (if needed and if available)
        GLOBAL_4.25.12.7z (required)

Standalone: ISTA 4.25.13.21836 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.25.12 / BLP 4.25.12 / SDP 4.25.12
Standalone Installer (all above files/dirs must be present in the same directory):  v4.24.13
PSdZData Lite: v4.25.12


Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v66.2)
SP-Daten v67.1.006


Tip: to download from Mega use MegaSync with Free/Pro Mega-Account, or jDownloader. MegaSync with free-account will continue after a break, be patient.

Google Drive LINK ADDED

You have not unlocked this post's content yet. Please reply to this thread to unlock the content.
Thanks !

Thanks! very good jobs.
Reply
Thanks for posting these updates, I have a f15 that I need to reset my steering angle sensor and my old ista won't read all the errors..... hope this works and thanks again
Reply
(08-17-2020, 10:29 PM)XuLeTZ Wrote: This Thread is for my Standalone Releases, always latest.

If you have no idea how to install ISTA manually, use my installer!!!
Please don't ask me for another Languages!!!

If someone needs help with ISTA installation, I will only help if you give me the log files.
1. all Logs under ISTA_installfolder\Logs
2. fileextract.log in ISTA_installfolder(if used my Installer)

ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.29.2x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
|  ista_standalone_installer_4.29.21.exe
|  ISTA_v4.29.21.23422.7z (required)
|  BLP_4.29.22.7z (required)
|  SDP_4.29.22.7z (if needed)
|  ExecutionBreak_4.28.41.7z (optional and if exist)
|  setup.ini (need to compare files with MD5 hash)

|
\---SQLiteDBs
        EN_4.29.20.7z (required)
        DE_4.29.20.7z (if needed)
        ZH_4.29.20.7z (if needed and if available)
        GLOBAL_4.29.20.7z (required)

Standalone: ISTA 4.29.21.23422 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.29.20 / BLP 4.29.22 / SDP 4.29.22
Standalone Installer (all above files/dirs must be present in the same directory):  v4.29.21
PSdZData Lite: v4.29.22


Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800
Thanks!
Reply
Great Thank You!
Reply




Users browsing this thread: 6 Guest(s)