ISTA Standalone / SQLiteDBs / SDP / BLP - latest [TORRENT] with installer EASY

[sumotide]

Thanks a lot! This is really going to help.

[scorpiusx]

This is exactly what is was looking for
Thank you

That is awesome! Thanks!

[doon]

Thanks a lot for sharing this!

[ac427]

Does ISTA+ only work with F series cars and above?

I am sure i have seen a vanos test run on an E46 using it?

[XuLeTZ]

Does ISTA+ only work with F series cars and above?

I am sure i have seen a vanos test run on an E46 using it?

No, is working on E series as well. Only the cable has to be K+DCAN, not ENET.
When using can cable, you need to configure EDIABAS with EDIABAS KONFIGURATOR from Standard tools to work with STD:OBD
Also change vehicle interface from ISTA to EDIABAS

[GrantF]

Hi All, trying to get the latest version of ISTA+ for my F16. Is there a Google drive link to download the files please?
Many thanks

[XuLeTZ]

Hi All, trying to get the latest version of ISTA+ for my F16. Is there a Google drive link to download the files please?
Many thanks

You can use the torrent, much faster and reliable than Google Drive.
Unfortunately the latest version just added to the torrent, so not many seed's for high speed downloads. But you can download 4.29.1x from torrent

[Papachivas]

This Thread is for my Standalone Releases, always latest.

If you have no idea how to install ISTA manually, use my installer!!!
Please don't ask me for another Languages!!!

If someone needs help with ISTA installation, I will only help if you give me the log files.
1. all Logs under ISTA_installfolder\Logs
2. fileextract.log in ISTA_installfolder(if used my Installer)

ISTA Standalone

* Reject fake FSC's can be disabled in ISTAGUI.exe.config, default is active.
* resolution can be changed in the ISTAGUI.exe.config
* disable CheckSystemRequirements is now possible in ISTAGUI.exe.config
* enable programming with ENET is now possible in ISTAGUI.exe.config (at your own risk.)
* enable Diagnose for J29 (Toyota Supra) is now possible in ISTAGUI.exe.config.
* "Unknown terminal voltage!" message with ENET is fixed, now ISTA check really Voltage, but not display it.
* don't ask me to remove "Battery voltage (terminal 30) below threshold value..." message, this is a important message!!!
* read FASTA Data from Vehicle is disabled in ISTAGUI.exe.config
* if you use my Regfiles, open it with Notepad and change the InstallLocation to the right Location on her PC. (not needed with Installer)

- for Diagnose only, neccessary SQLiteDBs GLOBAL(required), en-GB(required), de-DE(optional) and BLP(required) in the same Version as App (example 4.29.2x).
- for Programming is SDP needed, using older Versions allowed.

Installer need this structure (see attachment):
Downloaddirectory
| ista_standalone_installer_4.29.21.exe
| ISTA_v4.29.21.23422.7z (required)
| BLP_4.29.22.7z (required)
| SDP_4.29.22.7z (if needed)
| ExecutionBreak_4.28.41.7z (optional and if exist)
| setup.ini (need to compare files with MD5 hash)
|
\---SQLiteDBs
EN_4.29.20.7z (required)
DE_4.29.20.7z (if needed)
ZH_4.29.20.7z (if needed and if available)
GLOBAL_4.29.20.7z (required)

Standalone: ISTA 4.29.21.23422 / SQLiteDBs (OTHER,en-GB,de-DE,zh-CN,it-IT) 4.29.20 / BLP 4.29.22 / SDP 4.29.22
Standalone Installer (all above files/dirs must be present in the same directory): v4.29.21
PSdZData Lite: v4.29.22


Standard Tools Installer (Ediabas, INPA, NCS Expertentool etc. ECU and SGDAT updated with v68.0)
SP-Daten v68.0.800

[DENTFLEX]

Thank you, XuLeTZ

[Wippi]

!!! Vielen Dank !!!