04-21-2024, 01:25 AM
(This post was last modified: 04-21-2024, 01:30 AM by bradb7216.
Edit Reason: forgot to add some info.
)
Hey guys. Im hoping to find some help here. 2009 535i Xdrive. I was doing some programming and when I got to my GWS and DSC modules I received signature errors on both at 100%, I will post screenshots. I am using a K+CAN cable and from what Ive seen that could be my problem? When I run through with NCS I am getting different .ipo file names than I did originally. Both ipo files are files that are not in my SP Daten v.67.1 files. My GWS was calling for 080100GWS60, but now it is calling for 16GWS60.ipo which I cant find anywhere. NFS Emergency is telling me that the ECU addresses for both are incorrect but they arent. My last INPA screen shows both modules are ok. 2 days ago neither showed up. Now the identification screen lacks the part numbers. Can I manually add those? I am ordering an ICOM cable tonight hoping that will work. Any help would be greatly appreciated. Pics included. Wanted to add battery had plenty of charge as I always hook up my charger when either diagnosing or coding.