Hi,

Has anyone succeeded using BU Remote Utility with ÏçØɱ? Whenever I enter local ÏçØɱ ip address with port the program crashes. Any update?

Thanks in advance.

Hello everyone,
I am currently experiencing an xdrive problem on my e61. 
I was entitled to the famous faults 5461 (VTG: Servomotor activation fault) and 5F3A (DSC: Transfer case: malfunction) which led me to replace the transfer case actuator. It turns out that this was probably not the cause of my problem since the worm screw in the old actuator is in good condition (replaced 3 years ago by the previous owner). After replacement, I tried to do a calibration with ÎŜ†Ä which always ends in a communication fault.
I now have fault 54C4 (VTG: faulty calibration)

What do you think? 

Thank you for reading me

Hello World

My name is Julien, I am 39 years old and I own a 2006 530xd E61 with automatic transmission I live in France and work in Luxembourg.

Hello, I have bought an US X5 MY 2011 with the 35d engine. Unfortunately the keys have been stolen before, so no keys were left for the car. The previous owner stopped the engine due to strange sounds. Afterwards he wasn’t able to start the engine, because the battery was drained.

I checked at home the battery, it was completely dead, showing about 7 V. 

So replaced battery and took it to someone who made a key for me with his CGDI over OBD. 

After a few minutes the key was ready and everything in the car worked, ignition worked, starter worked. 

But even though the car cranked, it wouldn’t start.
Only one relevant error code came up 2E3C - so EWS manipulation or tamper protection. 

Tried to sync CAS and ECU, but without any chances to get it working. 

As it’s an CAS3+ it is not possible to just sync them, so what could be the issue here? 

I suspect that maybe ISN in CAS was corrupted by CGDI, even though the dealer says CGDI can not mess up any ISN. Probably because of the drained battery? 

Updated the car today with ÎŜ†Ä/P, but error still is there, car won’t start. 

Any ideas what can be done else to get this fixed? 

Thanks!

Hey i am new to this forum

Hi all,

trying to flash a G12 740D with alpina gearbox flash but keep getting error during flash about distant gateway unavailable 

i have attached the files below any help or guidance would be greatly appreciated

Attached Files

  G12.zip (Size: 4.78 KB / Downloads: 2)

Hello to all,my ride is 520 xd 2016

Thanks for the add. I am a 30 year tech and always learning something new here in the great USA

Hello to everyone

Buongiorno, ho codificato il tft della mia gs 1250 2022, grazie anche a questo forum, mi chiedevo non avendo fatto un backup iniziale, vorrei sapere se posso fare il backup da un'altra gs, e nel caso devo stare attento alle versioni? io ho modificato solo kombi3 e xbco. Oppure qualcuno ha i valori standard di questi due moduli?
grazie mille

Good morning, I encoded the TFT of my GS 1250 2022, thanks also to this forum, I was wondering not having done an initial backup, I would like to know if I can make a backup from another GS, and if so should I be careful about the versions? I only modified kombi3 and xbco. Or does anyone have the standard values ​​of these two modules?
thanks