Good morning and thank you very much in advance for the great work that some of you do.

I'm very new to the group. I see many versions of ÎŜ†Ä and my main problem and according to what I read is that you have to install them in some manual way so as not to have problems with the activation.
Please can you help me or show me through some video of the order to make a good installation.

No matter how many files I download from Mega, I have the same problem in the end. 

Thank you very much in advance.

Hello, I hope you're all well. I'm here with an issue related to a 2018 BMW G30. When I change lanes, all safety systems give an error, specifically the lane departure warning, active lane assistant with side collision avoidance, and so on. These errors don't persist, and after turning off and restarting the engine, everything returns to normal until certain conditions are met again, such as changing lanes when a car is detected behind me. I assume it's related to the vibrations in the steering wheel, as I haven't felt them in a while.
Is it normal to have so many ECUs showing in red? When the errors appeared, the DSC/DDE/FRSF ECUs turned yellow.
[font=Söhne, ui-sans-serif, system-ui, -apple-system, 'Segoe UI', Roboto, Ubuntu, Cantarell, 'Noto Sans', sans-serif, 'Helvetica Neue', Arial, 'Apple Color Emoji', 'Segoe UI Emoji', 'Segoe UI Symbol', 'Noto Color Emoji']Is it normal to have so many ECUs showing in red? When the errors appeared, the DSC/DDE/FRSF ECUs turned yellow.[/font]

Hi i need help i try coded a used amplifier to my vehicule F07
I do this with ė-šÝ§
Connect => Read FA (VO) => Activate FA (VO) => Read VCM => Left-Click on AMP => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom) => Select OK => Right-Click on AMP (the ECU itself not the underlying CAFD) => Select CODE

But i got this error

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
ExecutionID=2024/04/21-13:28:30.939
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
MCDDiagService<id=46634, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: negative response : conditionsNotCorrect, link=AMP_TOPHB_37_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=AMP_TOPHB_37_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=AMP_TOPHB_37_ETHERNET> [DIAGSERVICE]
[AMP_TOPHB - 37] There was an error during TAL execution, please check the log files. [WARN]
[AMP_TOPHB - 37] - [Exception - AMP_TOPHB - 37] negative response error:
 code: TIMEOUT P2/T2 occurred
 description: P2 timeout on Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: AMP_TOPHB_37_ETHERNET
 severity: ERROR

[] null [THROWABLE]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "15s". [C206]

Read SVT after TAL execution started.
MCDDiagService<id=46600, job=com.bmw.psdz.jobs.common.MCD3_GenerateConfigFromVehicle, service=RDBI_SVK, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=46634, job=com.bmw.psdz.jobs.common.MCD3_GenerateConfigFromVehicle, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: negative response : conditionsNotCorrect, link=AMPT_37_ETHERNET> [DIAGSERVICE]
Read SVT after TAL execution finished.
Abarbeitung beendet

Hello friends, I have problem with winkfp, I try to flash MOSTGW but it stuck, in comfort mode when i choose my zusb 9185627 MOSTGW, it give me Hardware number 9185626 and Assembly identification number 9185627. I try in expert mode but nothing, i try to update but again nothing. Please for some help, now ccc is not working and motor spin all the time.

Hey guys. Im hoping to find some help here. 2009 535i Xdrive. I was doing some programming and when I got to my GWS and DSC modules I received signature errors on both at 100%, I will post screenshots. I am using a K+CAN cable and from what Ive seen that could be my problem? When I run through with NCS I am getting different .ipo file names than I did originally. Both ipo files are files that are not in my SP Daten v.67.1 files. My GWS was calling for 080100GWS60, but now it is calling for 16GWS60.ipo which I cant find anywhere. NFS Emergency is telling me that the ECU addresses for both are incorrect but they arent. My last ÏÑÞÀ screen shows both modules are ok. 2 days ago neither showed up. Now the identification screen lacks the part numbers. Can I manually add those? I am ordering an ÏçØɱ cable tonight hoping that will work. Any help would be greatly appreciated. Pics included. Wanted to add battery had plenty of charge as I always hook up my charger when either diagnosing or coding.

Attached Files

Thumbnail(s)
               

How does this work?

How does this device work?

https://carplaymmb.com/products/mmb-bmw-...rrency=USD

My mate had this and it's basically an android box which connects to carplay (wirelessly). Does anybody know how that's possible OR if there is a way to create an app that does the same thing for an android phone?

Servus,
I just got a G21 320dx M-Sport and started to modify it on the first day i got it.

I did already multiple modifications for my BMW motorcycles F750 and R1250GS and looking forward to find new ideas and share knowledge.

cheers from Austria,
zip2null

Good morning,
I'm new to this forum and hope to contribute my experience on BMWs.
I own a 2013 BMW F31 335i Xdrive Modern Line 60000km.

I live in France in BEAUPONT north of Lyon.

I am a fan of home automation, auto reprogramming, extensive experience in automobile mechanics

Hi, I have an E90 335d and a 2016 I8. I bought the I8 heavily damaged and most of the physical components are all repaired but the EME and LIM module aren’t communicating. I have ÎŜ†Ä but am still trying to figure out the PSDZdata thing. When I put it in the file it still says programming data n/a.

Attached Files

Thumbnail(s)
           

Hello,

I have a new s1000rr 2024 and found this forum.
Also bought BU todo some coding and looking in my bmw.

ty