Hello everyone. 

Looking for a complete step by step guide on installing harman kardon , logic 7 to 2013 f11 which currently has base audio.

WILLING TO PAY!

Hi to all forum members

Hi, i have a bmw f21 lci 2016 with nbt evo retrofit, when i tried to update via ėšÝ§ with ÏçØɱ or enet failed after complete speechece bar and start speechcommon, i did it several times but nothing. Can you help me please?

Attached Files

Thumbnail(s)
   

Hello Community,

I own an E93 M3 from 2008.
Unfortunately, a vehicle update was carried out due to a defective control unit.

Unfortunately, this also included the CVM control unit.

After subsequent coding, the soft top can no longer be closed by radio key.

I have read that the CVM could be taught this function again via downgrade (ZUSB).

Have any of you ever tried this or have any ideas?

Thanks for tips

Hey guys..first of, hope im in the right section of the forum      now ive been coding here and there few thing on my 340 had some little error here and there but been learning alot (wasnt too afraid to play with it expert mode since ive been working as an IT for almost 10y now as well as abit of programing back in the days) so anyway i went and try to retrofit LDW wihch i realized after that i need size sensors and only have kafas2.. so got the error right away lane departure error.. wouldnt worry too much and just let it be since i needed to go for work,

Arrived at work tried to connect and code kafas.. error (using my iphone Bimmerutility)

So i went and try on pc with B/U... red triangle on KAFAS module saying CAFD not there.. tried to code it (BU detected it and suggested it) but arrounbd 60-70 it gives an error.

tried get it fixed using ÎŜ†Ä (basic steps like scaning modules call them the repairs when displaying the module but cant get too the final step of coding)  no luck.

Also ė-šÝ§ but might have steps missing? not sure how to inject CAFD when therre'S none? Alson i-step (the version on the right) aint showing the current I.,

I do have backup from BU also logs ffrom it.. as of now KAFAS is being seen in ÎŜ†Ä looks like but cant reinject cafd.

KAFAS2 - CAMERA-BASED DRIVER ASSIST SYSTEM
---------------------------------------
E07C19: No message (status, operating element lane departure warning, 0x343), receiver KAFAS, transmitter FEM/FRM/BDC-ZGM
E07C21: No message (terminals, 0x12F), receiver camera-based driver support systems, transmitter FEM/FRM/CAS/BDC-ZGM

VDC1 - VERTICAL DYNAMICS MANAGEMENT
---------------------------------------
482951: EDC: vertical acceleration sensor - front left - zero point not learned
482955: EDC: vertical acceleration sensor - front right - zero point not learned

DSC - DYNAMIC STABILITY CONTROL
---------------------------------------
D354F8: No message (terminals, 0X12F), receiver DSC, transmitter CAS/FEM

TRSVC - ALL-ROUND VISION CAMERA
---------------------------------------
CAAC0D: Signal (lid status, 0x2FC) invalid, transmitter CAS / FEM

ACSM - CRASH SAFETY MODULE
---------------------------------------
XXX: No DTC codes present.

AMPT - TOP HIFI AMPLIFIER
---------------------------------------
XXX: No DTC codes present.

ASD - ACTIVE SOUND DESIGN
---------------------------------------
XXX: No DTC codes present.

ATM - TELEMATIC COMMUNICATION BOX
---------------------------------------
XXX: No DTC codes present.

DME_BAC3 - DIGITAL MOTOR ELECTRONICS
---------------------------------------
XXX: No DTC codes present.

EGS - ELECTRONIC TRANSMISSION CONTROL
---------------------------------------
XXX: No DTC codes present.

EPS - ELECTROMECHANICAL POWER STEERING
---------------------------------------
XXX: No DTC codes present.

FEM_BODY - FRONT ELECTRONIC MODULE
---------------------------------------
XXX: No DTC codes present.

FEM_GW - CENTRAL GATEWAY MODULE
---------------------------------------
XXX: No DTC codes present.

FLE - FRONTAL LIGHT ELECTRONICS LEFT
---------------------------------------
XXX: No DTC codes present.

FLE - FRONTAL LIGHT ELECTRONICS RIGHT
---------------------------------------
XXX: No DTC codes present.

FZD - ROOF FUNCTION CENTER
---------------------------------------
XXX: No DTC codes present.

GWS - GEAR SELECTOR SWITCH
---------------------------------------
XXX: No DTC codes present.

HU_NBT2 - HEADUNIT HIGH
---------------------------------------
XXX: No DTC codes present.

ICM - INTEGRATED CHASSIS MANAGEMENT
---------------------------------------
XXX: No DTC codes present.

IHKA3 - INTEGRATED AUTOMATIC HEATING/AIR CONDITIONING SYSTEM
---------------------------------------
XXX: No DTC codes present.

KOMBI - INSTRUMENT PANEL
---------------------------------------
XXX: No DTC codes present.

LMV_FR - TRANSFER BOX
---------------------------------------
XXX: No DTC codes present.

REM - REAR ELECTRONIC MODULE
---------------------------------------
XXX: No DTC codes present.

SM2 - SEAT MODULE, DRIVER
---------------------------------------
XXX: No DTC codes present.

TBX - TOUCHBOX
---------------------------------------
XXX: No DTC codes present.

ZBE3 - CONTROLLER (IDRIVE)
---------------------------------------
XXX: No DTC codes present.



Thanknyou guys

Hey there, I’m a backyard BMW owner with an F25. I’m reaching out to update a few things on the car and need some direction.  Currently have a no working install of ÎŜ†Ä + that I’d love to get up and running. ENet connected fine with ÎŜ†Ä P, but my car considers it old news and won’t interface. Help!

Hi,

I have one e39 525d that I want to flash to stock to make sure it is not a problem of the tune that is currently on it but I would like to flash back the tune if it is not the problem. I know how to flash/update modules with winkfp to stock but not sure how to read stuff from the ECU and if its even possible with regular k+dcan cable. I used to do this on MS41 but that was with some specific program for only MS41. Thanks for any help.

Bmw owner/enthusiast from Nottingham UK.

Looking to find out more about diagnostic tools including how to install and use ÎŜ†Ä-D 

Cheers

Hello Bimmer Community,

Asking for help with manually installing SDP for ÎŜ†Ä+_4.39.20.  It seems like older version of ÎŜ†Ä+ included the SDP (Programming) files.  Am I on the correct path in noticing that the newer versions only include BLP files and you have to install a latest Psdzdata file?

Thanks in advance!