Helo, I am new here, attending to lean about n63 and my next move will be M 5 or 6
God bless America

Hey guys im new here im in usa

So, as Rob write manual how to register battety in ÏÑÞÀ, I will write how you can make 
same procedure using ÎŜ†Ä+

Pictures are no needed because is easy process, so let's start:

1) Connect your diagnostic interface to car (K-DCAN for E-series / ENET for F/G-Series) or ÏçØɱ (best choice at all);

2) Start program using INPAGui.exe

3) Choose OPERATION -> READ OUT VEHICLE DATA -> and press: COMPLETE IDENTIFICATION.

4) After 1-2 minutes ÎŜ†Ä will read all data from your car, and Tree with modules will be displayed
    (in that moment we don't need to care too much, but you can check on this windows how much errors are stored,
     and status of all modules: green - everything ok / ~yellow -> there is a issue  / red - no communication with ECU).

5) Now we choose: VEHICLE MANAGEMENT and SERVICE FUNCTION

6) From tree on left side you choose: BODY -> VOLTAGE SUPPLY -> BATTERY and click one time REGISTER BATTERY EXCHANGE 

7) You have now two option to choose:
    1) Display exchange history (so you can check when last time battery was changed/register);
    2) Register exchange ( <- this is option what you must choose);

8) Next window show us what battety capacity is currently register.
    And again you have few option to choose:
     1) Exchange battery with same capacity  (<-- mostly you choose this option)
     2) Exchange battery with lower/bigger capacity  (<- when you buy different battery with bigger/lower aH capacity)
     3) Exchange battery from normal to AGM    (<- when you want change normal lead-acid battery to AGM)
     4) End service function

9) Choose option 1  (because you buy exactly the same battery which was previous installed in your car) and click CONTINUE;

10) Answer on next question about battery type  [ original bmw or just OEM ] (YES/NO) and click CONTINUE;

11) Now you will see that ÎŜ†Ä is busy with writing information to DME/DDE, 
     after short while you will see message that battery exchange was successfully  and press CONTINUE;

12) On next step DATE and TIME will be set up, so press CONTINUE;

13 ) Next window is confirmation that date and time was changed with success, press CONTINUE;

14) And will show message: SERVICE FUNCTION FINISHED, press CONTINUE;


Battery is now registered to your BMW.

Hi Guys

I'm new on this forum. 
What I can write: 
Born in Poland, Live in Nederland

Coding and Retrofit doing as weekend extra job
If needed I can also help remotely ^^

Hello everyone

Hi new to this I have a bmw f10 520d stage 1 and after some advise on coding

Hello everyone! thanks for accepting me in the forum. I have a BMW 525xd F10 from 2012. I hope to share my experience and learn new coding solutions.

Nico

Untreated  in  BMW's

Hello from Ohio Cleveland area. Driving a 2010 335d

Hello i am ron from switzerland

I wish u all a good time.

I like to learn and give help.

Regards

ron