+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: ÏçØɱ next (oem) not showin in ÎŜ†Ä 4.32.15 anymore? (/showthread.php?tid=5959)
Pages:
1
2
RE: ÏçØɱ next (oem) not showin in ÎŜ†Ä 4.32.15 anymore? - at0ny - 03-01-2024
(02-14-2024, 06:41 PM)TheNine90 Wrote: Sometimes you have to click twice in ÎŜ†Ä for it to work.trust me did it more then twice to update via ÎŜ†Ä+ but dont start. If you can send its ok i can have a check?
The firmware should come with the setup files. I can send you latest firmware if interested
got itoolradar working now after i change path to right folder of java.. found solution for this on MHH auto. and works.
loged in to ÏçØɱ next does not show any strange things:
Current PACKAGE IMAGE version:
04.23.10
Current SYSTEM IMAGE version:
01.23.10
Current APPLICATION IMAGE version:
01.23.10
stil wierd that ÎŜ†Ä+ dont show the ÏçØɱ?... Itoolradar show device state free
RE: ÏçØɱ next (oem) not showin in ÎŜ†Ä 4.32.15 anymore? - TheNine90 - 03-01-2024
(03-01-2024, 04:49 PM)at0ny Wrote:Latest firmware sent(02-14-2024, 06:41 PM)TheNine90 Wrote: Sometimes you have to click twice in ÎŜ†Ä for it to work.trust me did it more then twice to update via ÎŜ†Ä+ but dont start. If you can send its ok i can have a check?
The firmware should come with the setup files. I can send you latest firmware if interested
got itoolradar working now after i change path to right folder of java.. found solution for this on MHH auto. and works.
loged in to ÏçØɱ next does not show any strange things:
Current PACKAGE IMAGE version:
04.23.10
Current SYSTEM IMAGE version:
01.23.10
Current APPLICATION IMAGE version:
01.23.10
stil wierd that ÎŜ†Ä+ dont show the ÏçØɱ?... Itoolradar show device state free
RE: ÏçØɱ next (oem) not showin in ÎŜ†Ä 4.32.15 anymore? - at0ny - 05-22-2024
Its show the latest firmware i have when i login to ÏçØɱ.
Strange is sometimes itoolradar dont show the ÏçØɱ, restart laptop with ÏçØɱ connected and then it sometimes show. But not always. Dont know if a newer firmware can be a problem with 4.32.15? Because the orginial one itsa showed it was status firmware.
I had to use it 4 days ago but ÎŜ†Ä did not show the ÏçØɱ, enet cable no problem...
RE: ÏçØɱ next (oem) not showin in ÎŜ†Ä 4.32.15 anymore? - morbidwar - 08-21-2024
It sounds like there might be a compatibility issue between the updated firmware on your ÏçØɱ Next and the ÎŜ†Ä+ version you're using. Here are a few troubleshooting steps you can try:
1. Check Firmware Compatibility: Verify that the ÏçØɱ Next firmware version you installed is compatible with ÎŜ†Ä+ 4.32.15. Sometimes, new firmware may not be fully supported by older software versions.
2. Reboot and Reconnect: After updating the firmware, try rebooting both your ÏçØɱ Next and your computer.
3. Network Configuration: Ensure that your network settings are correctly configured. The ÏçØɱ Next should have a valid IP address, and your computer should be on the same network segment.
4. Update ÎŜ†Ä+: If possible, update your ÎŜ†Ä+ to the latest version. Sometimes, newer versions of ÎŜ†Ä+ have better support for updated hardware.
5. Reinstall Drivers: Try reinstalling the drivers for the ÏçØɱ Next on your computer. Sometimes, firmware updates may require a reinstallation of the drivers.
6. Check for Error Messages: Look for any error messages or logs in ÎŜ†Ä+ or the ÏçØɱ Next that might give more details about the issue.
7. Consult Documentation: Refer to the documentation for both ÎŜ†Ä+ and ÏçØɱ Next for any specific instructions or troubleshooting steps related to firmware updates.