+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3)
+--- Thread: 2016 G11 i-step update (/showthread.php?tid=6525)
RE: 2016 G11 i-step update - b21playa - 06-08-2024
(06-08-2024, 02:31 PM)TheNine90 Wrote: Which ecu is it? Might be the gateway that is causing esys not to connect
Passenger seat message module. Connected fine before but had to change ip address to dhcp for Icom and can not remember where I found the details for esys enet cable settings. Zgw_search Shows nothing.
Ip: 169.254.1.1
Subnet: 255.255.0.0
I’m sure there were settings for gateway and dns, but as I said can’t find them
RE: 2016 G11 i-step update - TheNine90 - 06-08-2024
You can use itoolradar to look for the ip address
Or even use same ip shown in ISTA
RE: 2016 G11 i-step update - b21playa - 06-08-2024
(06-08-2024, 04:11 PM)TheNine90 Wrote: You can use itoolradar to look for the ip address
Or even use same ip shown in ISTA
nothing came up in itoolradar unfortunately
RE: 2016 G11 i-step update - TheNine90 - 06-08-2024
you can use enet cable. In esys you need to input ip address in icom ip
RE: 2016 G11 i-step update - b21playa - 06-11-2024
Does anyone have the ip address / gateway etc for enet cable as I can not find the initial settings I used
EDIT - managed to get it finally connected via vin. Just need to read up how to flash via esys and sort out on weekend when I have time to put the car on a power supply