Remove "Sonderaustattung 843" power reduction on F31. - Printable Version +- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com) +-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1) +--- Forum: BMW F / G Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=3) +--- Thread: Remove "Sonderaustattung 843" power reduction on F31. (/showthread.php?tid=1304) |
Remove "Sonderaustattung 843" power reduction on F31. - Bosch - 02-11-2021 Hello everybody, here is my first question, since I am a total beginner as far as coding a car is concerned. I recently bought a 2017 F31, that is equipped among other things with the option sa 843, causing the car to have 14 HP less than it should. My question is how do I exactly go about coding it back to standard DDE map instead of the one currently installed in the car. I have already tried out a few things with ista D but this is a completely different task. I guess the VO needs to be changed before a DDE update is carried out but how exactly does one do that? Kind regards. RE: Remove "Sonderaustattung 843" power reduction on F31. - Bosch - 02-20-2021 Won't someone give me hints as to how to do this. I need to update the DDE module but I need to update it with the correct data. I am sure many of you could do it in the blink of an eye. Thx Remove "Sonderaustattung 843" power reduction on F31. - elthox - 02-20-2021 Esys is the way to modify vo and calculate the flash and coding for dme RE: Remove "Sonderaustattung 843" power reduction on F31. - wjgud123 - 02-21-2021 Hi Bosch. To remove $843 you must (hope you know basic of E-Sys) - Remove $843 from VO and write new VO to car. - Code DME with new VO (without 843) - Calculate TAL for update DME; - When you go to TAL Processing, mark only DME (be sure that option are marked: swDeploy and cdDeploy). - Update DME. -Job done. For safety reason, when you flashing any module, use external power supply (gys, mst). And you need full pszdata, not lite version Regards. Wojtek RE: Remove "Sonderaustattung 843" power reduction on F31. - crash_magnet - 02-21-2021 There is a procedure on f30.bimmerpost.com if you search for it on there. https://f30.bimmerpost.com/forums/showthread.php?t=1771792 RE: Remove "Sonderaustattung 843" power reduction on F31. - Bosch - 02-22-2021 Thanks for the excellent answers . I will try to find as much info as I can as I don't want to brick the ECU. I'll tell you how it went. I hope to get it done this week end. RE: Remove "Sonderaustattung 843" power reduction on F31. - Bosch - 04-25-2021 Thanks to all these good advices I managed to successfully flash the DDE to original spec. I only have two modules to go to bring everything to the same I step, but I have to find more info about flashing these: Acsm. Nbt2 They where on the prerequisites so I should do them but I am unsure as how to lock acsm once flashed, and the nbt works great, I might not fully understand that prerequisite stuff though. RE: Remove "Sonderaustattung 843" power reduction on F31. - bestactor - 05-06-2021 Anything for g01? |