+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: 520D E60 2007 modules stuck in Programming Mode 12 (/showthread.php?tid=1329)
520D E60 2007 modules stuck in Programming Mode 12 - Ireal - 02-19-2021
Hi, guys.
Somehow I screwed up my MMI/CCC and Bluetooth modules in my car.
The modules have the following ZB numbers:
MMI/CCC - 9176841
VIRTSG91 - 9176842
I couldn't find anywhere those ZB numbers.
I managed to re-write the CCC with a different ZB (I have an ICOM cable and some knowledge to use the MOST connection) but although the audio is working fine I can't see any words on the screen. Also, the BlueTooth (VIRTSG91) is still in programming mode as I couldn't find the ZB mentioned above.
Also I have a permanent error after I replaced the ECU (which I fried accidentally) called 2E3C DDE: EWS Anti-tampering Manipulation. Which means the CAS and the ECU needs to be synchronized, is just I couldn't find anywhere how to do that.
Any advice would be much appreciated.
Thanks
520D E60 2007 modules stuck in Programming Mode 12 - elthox - 02-20-2021
Post a screenshot from ista of ecu tree page. And dme can be synced though ista too in service functions
RE: 520D E60 2007 modules stuck in Programming Mode 12 - Ireal - 05-22-2022
For some reason I couldn't sync them in ISTA+ or ISTA-P.
In the end I was able to sort out the two modules I had stuck in programming mode 12, actually ISTA-P detected them and recoded and reprogram them both, so now they are working absolutely fine. The only issue I have left is syncing the DME with the EWS, which I couldn't do so far.