Bimmer Scene - Latest BMW Coding / Retrofits / Maps
BMW CIC 1b file Reader dont works Help - Printable Version

+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Coding & Navigation (https://www.bimmerscene.com/forumdisplay.php?fid=1)
+--- Forum: BMW E Series Coding & Retrofits & Diagnostics (https://www.bimmerscene.com/forumdisplay.php?fid=2)
+--- Thread: BMW CIC 1b file Reader dont works Help (/showthread.php?tid=5259)

Pages: 1 2

BMW CIC 1b file Reader dont works Help - Andreas339 - 04-08-2023

Hello my friends,

I have the following problem.
I would like to read the FSC activation code from my BMW E92 and use it to generate a new activation code.

I have already read the FSC with the SW ID Reader tool, but that was a few years ago.

Wanted to do it again now and update my navigation system.
Unfortunately I can not read the FSC so the 1b file.

The USB method doesn't work either.

Can you help me ?  What am I doing wrong?

RE: BMW CIC 1b file Reader dont works Help - jjan - 04-10-2023

What cable do you use? I believe this only works with ICOM on e-series. There is an other methode you can use for reading out 1B on e-series. There is a script somewere on the net you can copy on a USB and put in your car. I will then read the 1B file and copy it on the USB. You can then generate the fsc code.

RE: BMW CIC 1b file Reader dont works Help - Andreas339 - 04-10-2023

(04-10-2023, 09:01 AM)jjan Wrote: What cable do you use? I believe this only works with ICOM on e-series. There is an other methode you can use for reading out 1B on e-series. There is a script somewere on the net you can copy on a USB and put in your car. I will then read the 1B file and copy it on the USB. You can then generate the fsc code.


I use a K & DCan cable. I've tried the USB method a few times now, but it doesn't work. The car is built in 2010 I also did this while the USB stick was in the glove compartment. made a restart of CIC at the same time but that didn't work either. Are there any other options or tools?

RE: BMW CIC 1b file Reader dont works Help - F10535i - 04-11-2023

(04-08-2023, 12:26 PM)Andreas339 Wrote: Hello my friends,

I have the following problem.
I would like to read the FSC activation code from my BMW E92 and use it to generate a new activation code.

I have already read the FSC with the SW ID Reader tool, but that was a few years ago.

Wanted to do it again now and update my navigation system.
Unfortunately I can not read the FSC so the 1b file.

The USB method doesn't work either.

Can you help me ?  What am I doing wrong?

>>> in the picture its saying no response IFH-0009. That would be connection problem. Check if you have Com1 and 1ms in Device Manger 


RE: BMW CIC 1b file Reader dont works Help - er9191 - 01-18-2024

How does it all work with Navi Business (CIC Mid) ?? is there a tool for that?
I have enet cable and d-can cable.

RE: BMW CIC 1b file Reader dont works Help - TheNine90 - 01-18-2024

You can use esys to extract the required fsc

RE: BMW CIC 1b file Reader dont works Help - Memedalji_ - 01-18-2024

(01-18-2024, 11:28 AM)TheNine90 Wrote: You can use esys to extract the required fsc

esys dont work on e series …
(04-08-2023, 12:26 PM)Andreas339 Wrote: Hello my friends,

I have the following problem.
I would like to read the FSC activation code from my BMW E92 and use it to generate a new activation code.

I have already read the FSC with the SW ID Reader tool, but that was a few years ago.

Wanted to do it again now and update my navigation system.
Unfortunately I can not read the FSC so the 1b file.

The USB method doesn't work either.

Can you help me ?  What am I doing wrong?


this tool dont work with KDCAN Cable, only with ICOM. The USB Method works if you have correct usb stick like 2/4/8gb and the copy_scr file, if you need help send me a message

RE: BMW CIC 1b file Reader dont works Help - er9191 - 01-19-2024

(01-18-2024, 01:00 PM)Memedalji_ Wrote:
(01-18-2024, 11:28 AM)TheNine90 Wrote: You can use esys to extract the required fsc

esys dont work on e series …
(04-08-2023, 12:26 PM)Andreas339 Wrote: Hello my friends,

I have the following problem.
I would like to read the FSC activation code from my BMW E92 and use it to generate a new activation code.

I have already read the FSC with the SW ID Reader tool, but that was a few years ago.

Wanted to do it again now and update my navigation system.
Unfortunately I can not read the FSC so the 1b file.

The USB method doesn't work either.

Can you help me ?  What am I doing wrong?


this tool dont work with KDCAN Cable, only with ICOM. The USB Method works if you have correct usb stick like 2/4/8gb and the copy_scr file, if you need help send me a message


does it also work with cic mid (business)? I know the USB method from CIC Pro

RE: BMW CIC 1b file Reader dont works Help - jose_jn - 01-22-2024

Hi friend,

I have extracted lot of 1B files using a USB-ETH dongle from DLink like shown.
You only have to connect it to your USB-MapUpdate port (the one in the globebox) and connect through SSH using root:

Connect the dongle to your laptop
Configure your ethernet adaptor with:
  • IP: 160.48.199.98
  • Subnet Mask: 255.255.255.128
  • Gateway: left empty

Connect using Putty or similar using SSH protocol
  • IP: 160.48.199.99
  • Port: 21
User (one of these)
  • anonymous / no password
  • root / cic0803
  • root / Hm83stN)

Finally, copy this file to local:
/HBpersistence/normal/generalPersistencyData_DiagnosticSWTController


Your 1B file is inside, using a Hex Editor:
  • Find these 4 bytes: 0x01,0x01,0x00,0x1B 
  • Extract the next 319 possitions.


Regards.
[Image: 1981b1cc-b651-4f58-983d-469e1048ef7c?rule=%24_59.JPG]

RE: BMW CIC 1b file Reader dont works Help - eXslide89 - 01-22-2024

Here is a program that reads the FSC file. Works with e and f models


https://mega.nz/file/1Wo3ACKb#WW7KuxmDyw5I33i2wXzOGMpftMnoHO3IXURjwoDwRCE